Solution Distributor 20802060

$12.99

Genuine OEM solution distributor (part# 20802060) for Tornado disk scrubbers — fits the BDSO 27/28 (99786), BD 32/26 (99732) and BD 33/30 (99780). Spreads solution evenly across the scrub path.

The solution distributor is the manifold that takes water from the solution line and spreads it evenly across the width of the scrub deck. Tornado uses the same distributor on the BDSO 27/28 stand-on scrubber (Models 99786 and TS560-W28-U), the BD 32/26 (99732) and the BD 33/30 (99780). It has no moving parts, which makes it easy to overlook, and it is one of the most common causes of a machine that cleans well on one side of its path and poorly on the other.

Distributors clog rather than wear. Detergent residue, hard-water scale and the fine grit that gets past the water filter build up inside the passages and gradually close off the outlets furthest from the inlet. The result is a brush that is working wet at one end of the deck and nearly dry at the other, which shows as a stripe of poorly cleaned floor that stays in the same place pass after pass. A cracked distributor behaves differently — it dumps solution in one spot and starves the rest.

Before replacing it, clean the water filter screen and check the water valve, since a restriction upstream produces reduced flow everywhere rather than uneven flow. If flow is good at the valve and uneven at the deck, the distributor is the part. Flushing can recover a lightly scaled distributor; one that has hardened deposits in the outlets is cheaper to replace than to fight.

This is an inexpensive part that makes a visible difference to cleaning results. Call 763-535-0770 if you want help confirming it before you order.

Compatible Models

  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / TS560-W28-U
  • Tornado BD 32/26 — 99732
  • Tornado BD 33/30 — 99780

See where this part sits on the machine on the water valve drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the solution distributor do on the Tornado BDSO 27/28?

It spreads solution evenly across the full width of the scrub deck, so every brush works with the same amount of water.

My machine cleans better on one side than the other. Is that the distributor?

Very often, yes. When scale or detergent residue closes off the outlets furthest from the inlet, one end of the deck runs dry and leaves a stripe of poorly cleaned floor in the same place on every pass.

What models is the solution distributor (part# 20802060) compatible with?

Tornado lists it on the BDSO 27/28 (99786 / TS560-W28-U), the BD 32/26 (99732) and the BD 33/30 (99780).

How do I order the solution distributor (part# 20802060) or get help?

You can add the solution distributor (part# 20802060) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution distributor (part# 20802060) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Solution Distributor 20802060”

Your email address will not be published. Required fields are marked *