Solution Filter Assembly 47900150

$68.99

Genuine OEM solution filter assembly (part# 47900150) for Tornado floor scrubbers. It is the inline filter bowl and screen that catches debris before solution reaches the valve and the brush deck.

Genuine OEM solution filter assembly (part# 47900150) for Tornado floor scrubbers — compatible machines are listed below. It is the inline filter in the solution line: a housing with a removable bowl and a screen inside, sitting between the solution tank and the valve that feeds the brush deck.

Everything that goes into a solution tank eventually tries to go through this filter. Undissolved detergent, grit washed off a mop sink floor, bits of label, and the general sediment that settles in any tank all end up at the screen, which is exactly where you want them — downstream are the valve seat and the small outlets that wet the brushes, and those are much more trouble to clear.

So the single most common solution-flow complaint, a machine laying down less water than it used to or nothing at all, is a blocked screen far more often than it is a failed pump or valve. Check it before anything else: it takes a minute, it needs no tools on most machines, and the state of the screen tells you something about the water the machine is being filled with.

The assembly itself fails in predictable ways. The bowl cracks, usually from being over-tightened or from a knock; the sealing gasket hardens and takes a set, so the joint weeps and the line draws air instead of solution; and the screen tears, which lets debris straight through to the valve. A weeping filter is worth fixing promptly, because air in the solution line gives inconsistent flow that is easy to misdiagnose as a pump fault.

Clean the screen on a schedule rather than when flow drops, and replace the assembly when the bowl is cracked or crazed or the screen is torn.

Compatible Models

This part is shared across 3 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the solution filter assembly (part# 47900150) do?

It is the inline filter between the solution tank and the valve feeding the brush deck. Its screen catches undissolved detergent, grit and tank sediment before they reach the valve seat and the small outlets that wet the brushes.

My machine is laying down less solution than it used to. Where do I start?

Here. A blocked screen is a far more common cause than a failed pump or valve, it takes a minute to check, and on most machines it needs no tools.

How does the filter assembly itself fail?

The bowl cracks from over-tightening or a knock, the sealing gasket hardens and lets the joint weep so the line draws air, and the screen tears and passes debris to the valve. A weeping filter is worth fixing promptly, since air in the line mimics a pump fault.

How do I order the Solution Filter Assembly (part# 47900150) or get help?

You can add the Solution Filter Assembly (part# 47900150) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution filter assembly (part# 47900150) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Solution Filter Assembly 47900150”

Your email address will not be published. Required fields are marked *