Solution Line Fitting Cover 20310060

$1.99

Genuine Tornado solution line fitting cover (part# 20310060) — fits 16 Tornado scrubber models including the BDSO 27/28. Caps and protects the flanged solution fitting.

Genuine Tornado solution line fitting cover, part number 20310060, used on 16 Tornado scrubber models including the BDSO 27/28. It caps the flanged solution fitting it pairs with, keeping grit and splash off the joint and, on the machines where it is accessible, giving the operator something to grip that is not the fitting itself.

This is the cheapest part in the solution circuit and it is routinely left off after a service. That is a false economy. With the cover missing, grit works into the joint face and the seal starts weeping within weeks; worse, an exposed fitting takes a direct knock from a mop handle or a pallet and cracks, turning a one-dollar part into a fitting, a seal and an afternoon of tracing a leak.

Replace it when it is cracked, when the clip or thread no longer holds it in place, or when it has simply gone missing. Check that the fitting face underneath is clean and undamaged while you have it off — if the cover has been missing for a while, the joint usually needs attention too.

Call 763-535-0770 if you want to order the cover and its fitting together; they are on the same drawing and they are frequently replaced as a pair.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 26/26 — 99726
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U

This part is shared across 15 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the solution line fitting cover do?

It caps the flanged solution fitting, keeping grit and splash out of the joint and protecting the fitting from knocks.

Does it matter if the cover is missing?

Yes. Grit works into the exposed joint and starts the seal weeping, and an uncovered fitting is easy to crack with a knock — turning a very cheap part into a much bigger repair.

What models is the fitting cover (part# 20310060) compatible with?

Tornado lists it on 16 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the fitting cover (part# 20310060) or get help?

You can add the fitting cover (part# 20310060) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution line fitting cover (part# 20310060) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Solution Line Fitting Cover 20310060”

Your email address will not be published. Required fields are marked *