Solution Line Flanged Fitting 20310070

$5.99

Genuine Tornado flanged solution line fitting (part# 20310070) — fits 16 Tornado scrubber models including the BDSO 27/28. Connects the solution line into the tank or filter body.

Genuine Tornado flanged solution line fitting, part number 20310070, used on 16 Tornado scrubber models including the BDSO 27/28. The flange clamps against the tank wall or filter body with a seal behind it, and the barb or thread on the other side takes the solution hose. It is a small part doing a job that only announces itself when it stops working.

Fittings fail in two ways on a scrubber. The flange face distorts or cracks — usually from being over-tightened at some point — and the joint weeps solution down the inside of the machine, where it quietly corrodes whatever is below it. Or the barb wears and loses its grip on the hose, so the hose creeps off under pressure and dumps the tank. Neither is dramatic, and both get missed until someone notices a wet patch under a parked machine.

When you fit a new one, tighten it only until the seal compresses. These flanges are plastic and the temptation to give it another quarter turn is exactly what cracks the next one. Replace the seal with the fitting, clean the mating face, and support the hose so its weight is not hanging on the barb.

Call 763-535-0770 if you are tracing a solution leak and want help working out which fitting on the drawing you are looking at.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 26/26 — 99726
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U

This part is shared across 15 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the flanged solution fitting do?

It connects the solution line into the tank or filter body, sealing against the wall with a flange while the hose attaches on the other side.

I have solution weeping inside the machine. Could it be this fitting?

It is a common cause. A cracked or distorted flange face weeps steadily down the inside of the machine, and the damage usually traces back to over-tightening.

What models is the flanged fitting (part# 20310070) compatible with?

Tornado lists it on 16 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the flanged fitting (part# 20310070) or get help?

You can add the flanged fitting (part# 20310070) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution line flanged fitting (part# 20310070) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Solution Line Flanged Fitting 20310070”

Your email address will not be published. Required fields are marked *