Solution Tank Cap with Hole 62350016
$10.99
Genuine OEM vented solution tank cap (part# 62350016) for Tornado floor scrubbers. The hole lets air into the tank so solution can flow out freely.
Genuine OEM solution tank cap with hole (part# 62350016) for Tornado floor scrubbers — compatible machines are listed below. The hole is the whole point of this cap, and it is why a plain cap must not be substituted for it.
A sealed tank cannot empty. As solution leaves through the outlet, the space above the liquid has to be filled by air, and if there is nowhere for that air to come in, the tank develops a partial vacuum that fights the outflow. The symptom is a machine that lays down solution normally at first and then progressively less, or flow that surges and stalls as a bubble occasionally forces its way back up the fill. Operators describe it as the machine “running out” while the tank still has water in it, and it is one of the easiest faults on a scrubber to misdiagnose as a pump or valve problem.
The vent hole also has to stay clear. Dried detergent, dust, and a cap that has been dropped in a mop bucket can all block it, which produces the same symptom as fitting the wrong cap. Checking it costs nothing: hold the cap up to the light.
Other failures are the familiar ones — a cracked body from being dropped on concrete, stripped or distorted threads or lugs from being forced when misaligned, and a sealing face that has been scored so it no longer seats evenly.
Keep a spare: tank caps are among the most frequently lost parts on any scrubber, and the temptation to borrow a plain cap from another machine is exactly how this fault gets introduced.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Why does this cap (part# 62350016) have a hole in it?
So air can enter the tank as solution leaves it. A sealed tank develops a partial vacuum that fights the outflow, and the machine stops delivering solution properly while the tank still has water in it.
Can I use a plain cap instead?
No, and doing so is a common cause of an awkward fault — solution flow that starts normal and tails off, or surges and stalls. It gets misdiagnosed as a pump or valve problem.
My vented cap is fitted but flow still tails off. What should I check?
Whether the vent hole is clear. Dried detergent and dust block it, and a cap dropped in a mop bucket can plug it completely — which gives exactly the same symptom as fitting the wrong cap. Hold it up to the light.
How do I order the Solution Tank Cap with Hole (part# 62350016) or get help?
You can add the Solution Tank Cap with Hole (part# 62350016) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution tank cap with hole (part# 62350016) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet