Solution Tank Lever Hose Fitting 21410100

$5.99

Genuine Tornado lever hose fitting (part# 21410100) — fits 7 Tornado scrubber models including the BDSO 27/28. Connects the solution hose at the tank with a lever-operated coupling.

Genuine Tornado lever hose fitting, part number 21410100, used on 7 Tornado scrubber models including the BDSO 27/28. It is the lever-operated coupling that joins the solution hose at the tank, designed so the hose can be disconnected by hand for cleaning or tank removal without tools.

Because it is operated by hand, it wears from use rather than from age. The lever pivot develops play, the cam no longer pulls the coupling fully home, and the joint starts weeping solution. On a machine where the fitting sits above electrical components, a weeping solution joint is more than a nuisance. The second failure is the seal face inside the fitting, which hardens and stops conforming — you get a joint that feels tight but drips steadily once the tank is full and under head pressure.

Test it with the tank full and the machine parked: a correctly working fitting stays dry. Work the lever a few times and feel for slop at the pivot. If the fitting weeps, replace it rather than trying to over-close the lever, which bends the cam and ruins the mating hose end. Check the hose end itself while you are there — a stretched hose end will defeat a brand-new fitting.

Call 763-535-0770 if you want help identifying the fitting and the hose that pairs with it on your machine.

Compatible Models

This part is shared across 7 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the lever hose fitting do?

It joins the solution hose at the tank with a lever-operated coupling so the hose can be disconnected by hand for cleaning or tank removal.

My solution fitting drips when the tank is full. What is wrong?

Either the lever pivot has worn so the cam no longer pulls the coupling fully home, or the internal seal face has hardened. Both show as a joint that feels tight but drips under head pressure.

What models is the lever hose fitting (part# 21410100) compatible with?

Tornado lists it on 7 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the lever hose fitting (part# 21410100) or get help?

You can add the lever hose fitting (part# 21410100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution tank lever hose fitting (part# 21410100) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Solution Tank Lever Hose Fitting 21410100”

Your email address will not be published. Required fields are marked *