Square Key 5 x 5 x 32 60905055
$4.99
Genuine OEM square key (part# 60905055), 5 x 5 x 32 mm, for Tornado floor scrubbers. It is the drive key that locks a hub to its shaft in the steering group so torque is transmitted without the hub slipping.
Genuine OEM square key (part# 60905055), 5 mm by 5 mm by 32 mm long, for Tornado floor scrubbers — the machines it fits are listed below. It sits in a keyway cut into a shaft in the steering group, with the matching slot in the hub above it, and it is what transmits torque between the two.
A key is a deliberately simple part with an important property: it is meant to be the weakest link. If something in the drive train jams, the key is what gives way, and replacing a key is a far better outcome than replacing a shaft or a hub. That also means a key that has already done its job once must be replaced, not reused.
Inspect it any time a hub is removed. A key that has been working loose will show rounded or burred edges, a twist along its length, bright polished faces where it has been moving, or visible shearing at one end. Inspect the keyway in both the shaft and the hub at the same time: a key that has been loose hammers its own seat, and a new key dropped into a widened keyway will be loose from the first hour.
Fit the correct length as well as the correct section. A key that is too short carries the torque on too little bearing area and will deform; one that is too long can foul a shoulder or a retaining ring and prevent the hub seating fully, which produces exactly the looseness the key is supposed to prevent. The 32 mm length is specified for a reason.
This is the genuine Tornado part in the correct size and material, so the hub is driven the way it was designed to be.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BR 40/66 — 99795
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 3 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What size is the square key (part# 60905055)?
It is 5 mm square by 32 mm long, sized for the keyway in the shaft and hub it joins in the steering group.
Can I reuse a key?
No. A key is intended to be the weakest link in the drive — if something jams, the key gives way instead of the shaft or hub. Once it has deformed or sheared it must be replaced, and so should any key that shows rounding, burring, a twist or bright polished faces.
Why does my new key keep going loose?
Usually the keyway rather than the key. A key that has been loose hammers its own seat in the shaft or the hub, so a new key in a widened keyway is loose from the first hour. Inspect both keyways before fitting.
How do I order the Square Key 5 x 5 x 32 (part# 60905055) or get help?
You can add the Square Key 5 x 5 x 32 (part# 60905055) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the square key 5 x 5 x 32 (part# 60905055) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet