Steering Wheel 49215010
$209.99
Genuine OEM steering wheel (part# 49215010) for Tornado stand-on floor scrubbers. It is the operator’s steering control, keyed to the steering column that turns the drive wheel beneath the platform.
Genuine OEM steering wheel (part# 49215010) for Tornado stand-on floor scrubbers — the machines it fits are listed below. It is the wheel the operator holds for an entire shift, mounted on the steering column and secured at the hub, turning the drive wheel under the platform.
On a stand-on machine the steering wheel is also a handhold. The operator leans on it on turns, pulls on it stepping on and off the platform, and braces against it when the machine stops. That is a very different loading pattern from a car steering wheel, and it is why they fail at the hub and the spokes rather than simply wearing smooth.
Signs it needs replacing: a crack at the hub or where a spoke meets the rim, play between the wheel and the column that is not in the column itself, a rim that has split or lost its covering so the metal core is exposed, or a wheel that can be rocked on its mounting after the retaining hardware has been checked and tightened. Any crack at the hub is a replace-now condition — the wheel is a control, and a control that lets go while the machine is moving is a safety problem, not a cosmetic one.
When fitting a new wheel, check the key and the column taper or splines while they are exposed. A wheel that has been loose has almost always damaged what it was mounted on, and a new wheel on a worn key will come loose again quickly. Torque the retaining hardware properly and refit the nut cover.
This is the genuine Tornado part, so the hub, the key and the rim diameter match the original and the steering feel is unchanged.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the steering wheel (part# 49215010) do on a Tornado stand-on scrubber?
It is the operator’s steering control, mounted on the steering column and keyed to it, turning the drive wheel beneath the platform. On a stand-on machine it doubles as the operator’s handhold.
How do I know if the steering wheel (part# 49215010) needs replacing?
Replace it for any crack at the hub or where a spoke meets the rim, play between the wheel and the column that is not in the column, a split rim exposing the metal core, or a wheel that rocks on its mounting after the retaining hardware has been checked.
My new steering wheel went loose quickly. Why?
Usually the key or the column mounting. A wheel that has been loose damages what it is mounted on, so a fresh wheel on a worn key works loose again. Inspect the key and the column while they are exposed and replace them if marked.
How do I order the Steering Wheel (part# 49215010) or get help?
You can add the Steering Wheel (part# 49215010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the steering wheel (part# 49215010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet