Straight Fitting 62340080

$4.99

Genuine OEM straight fitting (part# 62340080) for Tornado floor scrubbers. It is the inline connector used at two points in the solution plumbing.

Genuine OEM straight fitting (part# 62340080) for Tornado floor scrubbers — compatible machines are listed below. In the water filter assembly it is an inline connector, used where a hose meets a component or another hose on the same axis. The assembly uses several straight fittings in different sizes, so order by part number: they look alike in a drawing and are not interchangeable.

The thing to understand about a plain connector is that its bore is part of the circuit. The solution system is balanced around the restriction of every component in the line, so a fitting with a smaller through-bore quietly reduces what the machine lays down at every setting of the control, and a larger one shifts the balance the other way. There is no fault code for that — just a machine that does not wet the floor the way it used to.

Fittings in a scrubber’s solution line work hard in a bad environment: constant moisture, cleaning chemistry, and hoses being pulled on and off. They crack at the thread root or the shoulder, usually from over-tightening or from leverage applied while removing a hose, and those cracks commonly show only as a weep under flow — enough to draw air in and make flow inconsistent. They also go brittle with age, so an old fitting can break the next time a hose is removed.

Inspect it whenever this plumbing is opened: look for hairline cracks, check the barb ridges are still sharp, and replace any fitting that has been over-tightened rather than hoping it seals once more.

Compatible Models

This part is shared across 8 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where is the straight fitting (part# 62340080) used?

In the water filter assembly, as an inline connector where a hose meets a component or another hose on the same axis. It is used at two points on the drawing.

The assembly shows several straight fittings. Are they interchangeable?

No. They look alike in the drawing but differ in size, and each one’s bore is part of the circuit’s balance. Order by part number.

How does a fitting like this fail?

It cracks at the thread root or shoulder, usually from over-tightening or leverage while pulling a hose off. The crack often shows only as a weep under flow, which draws air into the line and makes solution delivery inconsistent.

How do I order the Straight Fitting (part# 62340080) or get help?

You can add the Straight Fitting (part# 62340080) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the straight fitting (part# 62340080) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Straight Fitting 62340080”

Your email address will not be published. Required fields are marked *