Straight Fitting 62340081
$25.99
Genuine OEM straight fitting (part# 62340081) for Tornado floor scrubbers. It is the larger inline connector in the solution plumbing near the control valve.
Genuine OEM straight fitting (part# 62340081) for Tornado floor scrubbers — the machines it fits are listed below. In the water filter assembly it is the larger of the straight connectors, sitting in the solution plumbing near the control valve. Several straight fittings appear on this drawing in different sizes; they are not interchangeable, so order by part number rather than by appearance.
In a solution circuit, every connector contributes a little restriction, and the machine’s flow is balanced around the set that was designed in. Substituting a fitting with a different through-bore changes how much water reaches the brushes at a given control setting — a machine that suddenly wets less than it used to, with nothing visibly wrong, is often carrying a fitting someone fitted because it threaded in.
The environment is hard on these parts. Constant moisture, cleaning chemistry and the mechanical abuse of hoses being pulled on and off all take a toll. The classic failure is a hairline crack at the thread root or at the shoulder, caused by over-tightening or by using the fitting as a lever while removing a hose; it typically shows up as a weep under flow rather than a visible leak at rest. On the solution side that weep means air drawn into the line, which gives inconsistent flow that people spend hours chasing at the pump and valve.
Inspect it whenever this plumbing is opened. Clean old sealant off threads completely, look for cracks, check the barb ridges are still sharp, and replace a fitting that has been over-tightened.
Compatible Models
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 6 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the straight fitting (part# 62340081) used?
In the water filter assembly’s solution plumbing near the control valve. It is the larger of the straight connectors on that drawing.
Can I use one of the other straight fittings instead?
No. They differ in size, and each fitting’s through-bore contributes to the circuit’s flow balance. A fitting chosen because it threaded in is a common reason a machine quietly starts laying down less water.
What should I look for when inspecting it?
Hairline cracks at the thread root and shoulder — these usually weep under flow rather than leak at rest, and on the solution side that means air being drawn in and flow going inconsistent. Also check the barb ridges are still sharp.
How do I order the Straight Fitting (part# 62340081) or get help?
You can add the Straight Fitting (part# 62340081) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the straight fitting (part# 62340081) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet