Straight Fitting 62340100
$4.99
Genuine OEM straight fitting (part# 62340100) for Tornado floor scrubbers. It is the inline connector at the hose joint below the tank outlet.
Genuine OEM straight fitting (part# 62340100) for Tornado floor scrubbers — compatible machines are listed below. In the water filter assembly it is the straight connector at the hose joint below the tank outlet. Several straight fittings of different sizes appear in this assembly, so order by part number; they are drawn alike and do not interchange.
Its position makes it worth attention. A fitting close to the tank outlet is near the top of the solution circuit, where the head of water pushing through the joint is lowest, so a joint that weeps there is particularly good at drawing air into the line instead of pushing water out. The result is not a puddle under the machine but flow that varies between runs and refuses to respond consistently to the control — which is why people replace pumps and valves before finding a cracked fitting.
What fails is predictable for a plastic fitting in constant moisture and cleaning chemistry: hairline cracks at the thread root or the shoulder from over-tightening or from leverage while pulling a hose off; brittleness with age, so an old fitting breaks the next time a hose is removed; and barbs worn smooth where a clamp has repeatedly crushed the hose, after which no clamp will hold that joint.
Inspect it whenever the hose at this joint is disturbed. Look for cracks, check the barb ridges, fit the correct clamp and tighten to seal only — over-tightening a clamp here grooves the hose and guarantees the next joint leaks too.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the straight fitting (part# 62340100) used?
In the water filter assembly, at the hose joint below the tank outlet. The assembly uses several straight fittings in different sizes, so order by part number.
Why is a weep at this fitting hard to spot?
Because it is near the top of the solution circuit, where the head of water pushing through the joint is lowest. Instead of leaking water out, it draws air in — so you get flow that varies run to run rather than a puddle under the machine.
What should I check when refitting the hose?
That the barb ridges are still sharp, that there are no hairline cracks at the thread root or shoulder, and that the clamp is tightened only enough to seal. Over-tightening grooves the hose and guarantees the next joint leaks too.
How do I order the Straight Fitting (part# 62340100) or get help?
You can add the Straight Fitting (part# 62340100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the straight fitting (part# 62340100) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet