Thumb Switch Actuator Spring X8915

$4.99

Genuine OEM thumb switch actuator spring (part# X8915) for Tornado and Powr-Flite commercial high-speed burnishers — the return spring that lifts the thumb actuator and stops the machine when the operator lets go. Fits all Tornado Brute Force burnishers (see full list below).

The X8915 is the return spring for the thumb switch actuator. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on the current and earlier Brute Force 2000 Dust Control (98486) drawings, immediately after the actuator (X8914) itself.

Small as it is, this spring is a safety component. It is what returns the actuator and releases the momentary switch the instant the operator’s thumb comes off, which is what makes the machine stop rather than keep running unattended. A dead-man control is only as good as its return spring.

Replace the X8915 when the actuator feels soft or slow to return, when the spring has taken a set and sits shorter than a new one, when it is corroded, or when it has broken. Springs in this position fail from fatigue after hundreds of thousands of cycles and from corrosion in a wet environment, and a fatigued spring gives no warning other than a control that has gradually become vague. If you cannot remember when it was last changed on a high-hour machine, change it — it costs a few dollars and it is the part that stops the machine.

Do not stretch a tired spring to restore its length; stretching a fatigued spring buys a few days and leaves the control unreliable. Fit it with a new actuator (X8914) if the actuator is worn. The spring is shared across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the control parts listed. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.

Compatible Models

  • Tornado models:
  • Powr-Flite models:
    • B171
    • B172
    • B201
    • B202
    • C131
    • C171HD
    • C172
    • C201HD
    • C202
    • NM1600
    • NM171HD
    • NM171SD
    • NM2000
    • NM2000DC
    • NM201HD
    • NM202

Frequently asked questions

What does the thumb switch actuator spring (part# X8915) do on a burnisher?

It returns the thumb actuator and releases the momentary switch as soon as the operator lets go, which is what gives the machine its dead-man stop.

How do I know if my X8915 actuator spring needs replacing?

Replace it if the control feels soft or slow to return, if the spring has taken a set and is shorter than a new one, if it is corroded, or if it has broken.

Can I stretch a tired spring instead of replacing it?

No. Stretching a fatigued spring restores its length but not its force, and it leaves a safety control unreliable. The part costs a few dollars — fit a new one.

What models is the thumb switch actuator spring (part# X8915) compatible with?

All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).

How do I order the thumb switch actuator spring (part# X8915) or get help?

You can add the actuator spring (part# X8915) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Thumb Switch Actuator Spring X8915”

Your email address will not be published. Required fields are marked *