Tornado Brute Force 2000 98486 Housing X1455
$511.99
Genuine OEM main housing (part# X1455) for the Tornado Brute Force 2000 High-Speed Glazer with Dust Control, Model 98486 — the cast body that carries the motor, pad drive and dust-control shroud. Shown on the current main body drawing.
The X1455 is the main housing of the Brute Force 2000 Dust Control glazer (Model 98486). It is on both the current 14 July 2025 main body drawing and the earlier 29 December 2022 main assembly. The 98482B glazer uses a different housing (X8050AP) at the same position, which is the structural difference that makes the dust-control machine a distinct build rather than an accessory kit — so this part is model-specific and named as such.
Everything on the machine hangs off this part: the motor mounts to it, the pad drive runs through it, the wheels and axle are carried by it, and on the 98486 the dust-control shroud, skirt and filter mount all locate to it. That means a damaged housing is not a part you can work around. A housing that is cracked at a motor mount or at the axle bores lets the motor and pad driver sit out of alignment, and misalignment at 2,000 RPM destroys belts, bearings and pad drivers in sequence.
Replace the X1455 when the casting is cracked, when a mounting boss has broken away, when the axle bores have worn oval so the wheels no longer sit square, or when impact damage has distorted the shroud mounting face enough that the dust skirt can no longer seal to the floor. These are the cases where fasteners will not hold torque no matter what you do, and where a machine that was recently serviced starts eating belts again within weeks.
This is a significant repair and a significant part, so it is worth confirming the diagnosis before you order. If your machine is throwing dust, check the filter (19069), the dust control skirt (X1461) and the skirt clamp (X1469) first — those are far more often the cause than the housing. Call 763-535-0770 with your model and serial number and we will work through it with you before you commit to a housing. It is a shared part used across Tornado machines — see the full list of models below.
Compatible Models
- Tornado models:
Frequently asked questions
What does the housing (part# X1455) do on the Tornado 98486?
It is the main body of the machine: the motor, pad drive, wheels, axle, dust-control shroud, skirt and filter mount all attach to or locate on it.
How do I know if my X1455 housing needs replacing?
Look for cracks, a broken-off mounting boss, worn or oval axle bores, or impact damage that has distorted the shroud mounting face. A tell-tale sign is fasteners that will not hold torque and repeat belt or bearing failures from misalignment.
My 98486 is throwing dust — do I need a new housing?
Almost never. Check the dust filter (19069), the dust control skirt (X1461) and the skirt clamp (X1469) first. Those are the usual causes; the housing only comes into it after impact damage.
What models is the housing (part# X1455) compatible with?
The Tornado Brute Force 2000 High-Speed Glazer with Dust Control, Model 98486, on both its current and earlier drawings. The 98482B glazer uses a different housing (X8050AP).
How do I order the housing (part# X1455) or get help?
You can add the housing (part# X1455) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet