Tornado BDSO 20/21 Brush Deck Plate 21705050
$169.99
Genuine 20-inch brush deck plate (part# 21705050) for the Tornado BDSO 20/21 stand-on scrubber – the machined plate that closes the brush base and carries the shaft bearing face. Fits TS120-S59-UC, UG and UE.
The brush deck plate (part# 21705050) is the machined plate that closes the brush base on the Tornado BDSO 20/21 stand-on scrubber and provides the flat, true mounting face the brush shaft and its bushing register against. It is drilled for the ring of fasteners that clamp the assembly together and carries the bore that keeps the shaft perpendicular to the floor.
Because it sets the geometry of the whole scrub deck, a distorted plate shows up as a pad that wears heavily on one edge and a machine that pulls to one side during a pass. Operators often chase this by changing pads or adjusting down pressure, when the real cause is a plate that has been bent by an impact or warped by someone running the deck with a seized bushing. Other signs are fasteners that will not pull down evenly around the ring, a visible gap between plate and base at one point, and a disc that shows runout when turned by hand.
Fit the plate with all fasteners started loosely, then tighten in a cross pattern so it pulls down flat. Replace the plastic bushing (part# 47113010) and check the brush shaft (part# 21702010) while the deck is apart – a new plate against a worn bushing will not hold the shaft true for long. Confirm the disc turns freely and runs flat before returning the machine to service.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
Call 763-535-0770 with your serial number and we will confirm the plate against your parts book. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Brush Deck Plate FAQ
What does the brush deck plate do on the Tornado BDSO 20/21?
It closes the brush base and provides the flat machined face and bore that keep the brush shaft perpendicular to the floor, setting the geometry of the whole scrub deck.
How do I know if the brush deck plate (part# 21705050) needs replacing?
Heavy one-edge pad wear, a machine that pulls to one side, fasteners that will not pull down evenly around the ring, a gap between plate and base, or visible disc runout when turned by hand.
What models is the brush deck plate (part# 21705050) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the brush deck plate (part# 21705050) or get help?
You can add the brush deck plate (part# 21705050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush deck plate do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It closes the brush base and provides the flat machined face and bore that keep the brush shaft perpendicular to the floor, setting the geometry of the whole scrub deck.”}},{“@type”:”Question”,”name”:”How do I know if the brush deck plate (part# 21705050) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Heavy one-edge pad wear, a machine that pulls to one side, fasteners that will not pull down evenly around the ring, a gap between plate and base, or visible disc runout when turned by hand.”}},{“@type”:”Question”,”name”:”What models is the brush deck plate (part# 21705050) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the brush deck plate (part# 21705050) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush deck plate (part# 21705050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet