Tornado BDSO 20/21 Splash Guard Blade 21702030
$39.99
Genuine splash guard blade (part# 21702030) for the Tornado BDSO 20/21 stand-on scrubber – the main 20-inch deck blade that seals the brush cover to the floor. Fits TS120-S59-UC, UG and UE.
The splash guard blade (part# 21702030) is the main flexible blade on the 20-inch deck of the Tornado BDSO 20/21 stand-on scrubber. It runs the length of the brush cover and seals the gap between cover and floor, so the solution a disc throws at 140 RPM stays inside the cleaning path and reaches the squeegee instead of the baseboards.
Treat this blade as a consumable. It wears a scallop where it drags, hardens with chemical exposure, and eventually takes a permanent curl away from the floor. The practical test is to look at the floor behind the machine on a pass: a clean dry path with a wet halo outside it means the blade is no longer containing solution. Close up, a blade due for replacement will show a rounded rather than square edge, splits starting at the mounting slots, or a stiff glossy surface that no longer flexes. A worn blade costs solution, leaves slip hazards where the squeegee never reaches, and makes a healthy vacuum system look like it is underperforming.
Fit it with the deck down so you can set even contact along the whole length – the blade should touch and flex slightly rather than fold. Replace the short blade (part# 21302040) and the left and right side guards at the same time if they are of similar age; containment is a set, not a single part, and one new blade among three tired ones will not fix a leaking deck.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
Call 763-535-0770 if you want the full guard set quoted together. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Splash Guard Blade FAQ
What does the splash guard blade do on the Tornado BDSO 20/21?
It seals the brush cover to the floor along the main face of the 20-inch deck, keeping solution thrown by the disc inside the cleaning path so the squeegee can recover it.
How do I know if the splash guard blade (part# 21702030) needs replacing?
Look for a wet halo outside the scrub path. Up close, a rounded edge instead of a square one, a permanent curl away from the floor, splits at the mounting slots, or a hard glossy surface all mean it is done.
What models is the splash guard blade (part# 21702030) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the splash guard blade (part# 21702030) or get help?
You can add the splash guard blade (part# 21702030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the splash guard blade do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It seals the brush cover to the floor along the main face of the 20-inch deck, keeping solution thrown by the disc inside the cleaning path so the squeegee can recover it.”}},{“@type”:”Question”,”name”:”How do I know if the splash guard blade (part# 21702030) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Look for a wet halo outside the scrub path. Up close, a rounded edge instead of a square one, a permanent curl away from the floor, splits at the mounting slots, or a hard glossy surface all mean it is done.”}},{“@type”:”Question”,”name”:”What models is the splash guard blade (part# 21702030) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the splash guard blade (part# 21702030) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the splash guard blade (part# 21702030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet