Tornado BDSO 27/28 Brush Base Deck 48515050
$796.56
Genuine OEM brush base deck (part# 48515050) for Tornado 28-inch disc scrubbers. It is the housing that carries both brush motors, the splash guards and the solution feed.
Genuine OEM brush base deck (part# 48515050) for Tornado floor scrubbers — compatible machines are listed below. It is the main housing of the scrub head: the structure that carries both brush motors and their transmissions, provides the mounting for the splash guards, and shapes the space the solution is delivered into.
Everything about scrubbing performance depends on this part being true. The deck sets the relationship between the two brushes and the floor, so a deck that has been bent — usually by being driven into a dock plate, a pallet corner or a column — puts the brushes down unevenly. The symptom is a machine that cleans a visibly better stripe on one side, or brushes that wear at different rates, and no amount of adjusting down-pressure fixes it.
The other thing a deck does is contain. Working with the splash guards, it keeps solution under the head and in front of the squeegee instead of being thrown wide where the squeegee cannot recover it. A deck with a cracked skirt mounting or a damaged edge leaves wet trails outside the squeegee path, which looks like a squeegee fault and is not.
Inspect the deck whenever the machine has taken an impact, and whenever cleaning performance has gone one-sided. Check for cracks around the motor mountings in particular — those joints carry brush reaction torque and shock, and a crack there grows. Check the splash guard mounting points too, since torn mountings are the usual reason guards will not stay sealed against the floor.
This is the genuine Tornado deck, so the brush geometry and guard mountings are what the machine was built around.
Compatible Models
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the brush base deck (part# 48515050) do?
It is the main housing of the scrub head: it carries both brush motors and transmissions, mounts the splash guards, and contains the solution under the head so the squeegee can recover it.
My machine cleans better on one side. Could the deck be the cause?
Yes, if it has taken an impact. The deck sets the relationship between the brushes and the floor, so a bent deck puts the brushes down unevenly — you see a better stripe on one side and uneven brush wear, and adjusting down-pressure will not fix it.
What should I inspect on a deck?
Cracks around the motor mountings above all, since those joints carry brush reaction torque and shock and a crack there grows. Also check the splash guard mounting points — torn mountings are the usual reason guards will not stay sealed to the floor.
How do I order the Brush Base Deck (part# 48515050) or get help?
You can add the Brush Base Deck (part# 48515050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the brush base deck (part# 48515050) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet