Tornado BDSO 27/28 Drive Wheel Motor 46200480
$3,498.99
Genuine Tornado drive wheel (traction) motor for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. 24V geared traction motor that drives and steers the machine.
The drive wheel motor is the single component that moves a Tornado BDSO 27/28 across the floor. It is a 24-volt geared traction motor mounted in the steering head, and everything the operator does with the speed control ends at this motor. Because the BDSO 27/28 is a stand-on machine, the drive motor also carries the weight of the operator, the batteries and a full solution tank every time it starts from rest, which is why it is the most heavily loaded motor on the scrubber.
Drive motors fail in recognisable ways. Carbon brushes wear out and the motor starts and stops intermittently or loses power on ramps. Bearings dry out and the motor gets noticeably louder and hotter than it used to be. A gearbox that has lost lubricant whines under load and eventually strips. And a motor that has been run with a dragging rear wheel or an over-tight steering chain draws high current and trips the controller — in that case the motor is the symptom, not the cause, so check the rear wheel and the steering drive before you replace it.
This is a serious part with a price to match, so it is worth being certain before you order. If the machine will not drive at all, the fault is more often the drive wheel control assembly, a contactor or a fuse than the motor itself. Call 763-535-0770 with your serial number and a description of what the machine does and does not do, and we will help you confirm it is the motor before you buy one.
The motor appears on the steering wheel assembly drawing and again on the BDSO 27/28 block and detailed wiring diagrams, where you can trace its supply and its control circuit end to end.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — Model 99786
- Tornado BDSO 27/28 Stand-On Scrubber — Model 99786C
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the drive wheel motor do on the Tornado BDSO 27/28?
It is the 24-volt geared traction motor in the steering head that drives the machine forward and in reverse, carrying the operator, batteries and tank load as it goes.
How do I know if my drive wheel motor is failing?
The usual signs are intermittent drive, loss of power on ramps, a motor that runs hot or has become much louder, or a whine from the gearbox that rises with speed. A machine that will not drive at all is more often a control, contactor or fuse fault than a failed motor.
What models is the drive wheel motor (part# 46200480) compatible with?
Tornado lists it for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. If you have another Tornado stand-on machine, call us and we will confirm before you order.
How do I order the drive wheel motor (part# 46200480) or get help?
You can add the drive wheel motor (part# 46200480) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the drive wheel motor (part# 46200480) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet