Tornado BDSO 27/28 Solution Control Valve Rod 21510040

$69.99

Genuine Tornado solution control valve rod for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Links the operator control to the solution valve.

The solution control valve rod is the mechanical link between the operator’s solution control and the valve that lets water down to the brush deck on a Tornado BDSO 27/28. It is a plain rod with a job that only becomes obvious when it goes wrong: if it bends, corrodes or works loose at either end, the valve stops reaching full open or full closed even though the control at the panel feels normal.

Two complaints point here. The first is a machine that puts down too little water with the control fully open — the rod is not pushing the valve all the way, usually because it has bent or a clevis has worn oval. The second is solution that keeps trickling after the control is closed, which wastes chemical and leaves a puddle under a parked machine. Both get blamed on the valve itself, and the valve is often fine.

Check the rod before you order a valve. With the machine off, work the control through its full travel and watch the valve end: it should move fully in both directions with no lost motion at the joints. Clean the water filter screen at the same time, because a clogged screen produces low flow that looks identical from the operator’s position.

This is an inexpensive part that often saves replacing a much more expensive one. Call 763-535-0770 if you want help working through a solution-flow problem before ordering.

Compatible Models

See where this part sits on the machine on the water filter drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the solution control valve rod do on the Tornado BDSO 27/28?

It links the operator’s solution control to the water valve, opening and closing the valve as the control is moved.

Water keeps trickling after I shut the solution off. Is it the rod or the valve?

Check the rod first. If it has bent or a joint has worn, the valve never fully closes even though the control feels normal. If the rod moves the valve fully and it still passes water, the valve is at fault.

What models is the solution control valve rod (part# 21510040) compatible with?

Tornado lists it for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Call us if you need us to check it for another Tornado scrubber.

How do I order the solution control valve rod (part# 21510040) or get help?

You can add the solution control valve rod (part# 21510040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution control valve rod (part# 21510040) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 27/28 Solution Control Valve Rod 21510040”

Your email address will not be published. Required fields are marked *