Tornado BDSO 27/28 Solution Tank 47315410
$1,196.99
Genuine OEM black solution tank (part# 47315410) for the Tornado BDSO 27/28 stand-on scrubber. It is the moulded tank that holds the clean water and detergent the machine lays down.
Genuine OEM solution tank (part# 47315410) for the Tornado BDSO 27/28 stand-on scrubber. It is the moulded black tank that carries the clean water and detergent, and it is both a reservoir and a structural part of the machine: it carries its own weight of liquid, mounts the fill cap and the level hose, and supports the hardware that sits on and around it.
Tanks are not usually thought of as service items, and then one cracks. The ways it happens are consistent: a seam or boss splits from years of flexing with a full tank, a mounting boss tears out because something was over-tightened into it, or the tank is holed by an impact — a forklift tine, a dock plate, a rack upright.
The symptoms are worth recognising early, because a cracked tank wastes solution before anyone notices a puddle. A tank that empties faster than the run length should allow, damp patches in the machine bay rather than on the route, or solution appearing around the base of the machine when it has been standing all point here. A hairline crack high on the tank may only weep when the tank is full, so look at it full, not at the end of a shift.
Plastic tanks also age. Chemical exposure and UV make the material brittle over years, so an older tank can crack from a knock that a new one would shrug off, and a repair that holds for a week is common on brittle plastic.
Inspect the mounting points and the area around the fill and outlet whenever the machine is serviced, and replace fittings and gaskets rather than over-tightening them into a tank boss.
Compatible Models
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the solution tank (part# 47315410) do?
It holds the clean water and detergent the machine lays down, and it is structural as well — it carries its own liquid weight, mounts the fill cap and level hose, and supports surrounding hardware.
My tank seems to empty faster than the run should take. Why?
Look for a crack. A tank that empties early, damp patches in the machine bay rather than on the route, or solution around the base of a standing machine all point to a leak. A hairline crack high on the tank may only weep when the tank is full, so inspect it full.
How do tanks crack?
A seam or boss splits after years of flexing with a full tank, a mounting boss tears out from over-tightening, or an impact holes it. Chemical exposure and UV also make the plastic brittle over the years, so an older tank cracks from a knock a new one would shrug off.
How do I order the Solution Tank (part# 47315410) or get help?
You can add the Solution Tank (part# 47315410) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution tank (part# 47315410) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet