Tornado Drag Wand Nozzle Assembly 983476M-01

The Tornado Drag Wand Nozzle Assembly 983476M-01 is the genuine OEM replacement nozzle assembly for the PS Series drag wand — the business end of the wand, where the solution is laid down and the recovery airflow lifts it back out.

Compatible Models for the Drag Wand Nozzle Assembly

• Tornado PS Spotter 98220 — PS Series Professional Spotter (2 gal, 115V), Series G
• Tornado Mini-Marathon 98150 — compact carpet extractor

Tornado’s factory cross-reference for this assembly is complete rather than truncated: two machines, the PS Spotter 98220 and the Mini-Marathon 98150. It is a service part for the PS Series Drag Wand 98347 rather than for the machine directly. Call us at 763-535-0770 with your model and serial number if yours is not listed.

It is not currently listed in the dealer catalog we price from, which is why there is no price shown here. Call 763-535-0770 and we will quote it and confirm availability.

What the nozzle assembly does

Everything upstream of the nozzle — the pump, the hose, the valve — exists to deliver solution at pressure and vacuum at volume. The nozzle is what turns both into actual cleaning.

Its shape is doing two jobs at once. The slot presents a controlled opening to the carpet so that the recovery airflow is concentrated into a narrow, fast-moving stream rather than spread thinly over a wide mouth — air velocity is what lifts soil-laden water out of pile, and velocity comes from restricting the opening. At the same time the lip has to sit flat enough to seal against the carpet through the whole backward stroke, because every gap is air taken in from the room instead of out of the carpet.

That is why a nozzle’s condition shows up in the finished work rather than in the machine’s gauges. Suction at the hose can be perfectly normal while a distorted or chipped nozzle leaves carpet wetter than it should be.

When to replace it

Replace the nozzle assembly if the lip is chipped, cracked, split or has a piece missing; if the lip is no longer straight, so it rocks instead of sitting flat; if the slot has been widened by wear or by something being poked through it; if the assembly is distorted from heat or from being stood on; or if it will not seat and seal on its threaded connection.

The symptom to watch for is poor recovery with normal suction. If the machine pulls well at the hose end but the carpet is coming up wetter than it used to, and the jet and valve check out, the nozzle is the next thing to look at. Lay the head on a flat surface and look along the lip from the side: any daylight under it is lost airflow.

Also inspect it whenever the wand is dropped. A nozzle takes the impact before anything else on the tool does.

Fitting notes

Depressurise the system and let the machine cool before you start. Note how the old assembly is oriented before removing it; the nozzle is not symmetrical and it does not clean fitted the wrong way round.

Clean the mating surfaces so the new assembly seats properly, and do not overtighten — a nozzle housing cracked by over-torquing is a common and entirely avoidable failure. Check that the lip sits flat on a known flat surface once fitted, then test on an offcut or an inconspicuous area before working on a customer’s carpet.

Flush the wand with clean water at the end of each day. Detergent dried in a nozzle slot narrows it unevenly, which does the same thing to the spray and recovery pattern as mechanical damage.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956.

You can browse every assembly for this machine on our Tornado PS Spotter 98220 parts page, and the manufacturer’s specifications are published at tornadovac.com.

Frequently Asked Questions

What does the Drag Wand Nozzle Assembly 983476M-01 do?

It is the head of the wand, where solution is laid down and the recovery airflow lifts it back out. The slot concentrates the airflow into a narrow, fast stream — velocity is what pulls soil-laden water out of carpet pile — while the lip seals against the carpet so the air comes out of the carpet rather than in from the room.

My machine still has strong suction but the carpet comes up wet. Is this the part?

Quite possibly. Poor recovery with normal suction at the hose is the classic nozzle symptom, once the jet and the valve have checked out. Lay the head on a flat surface and sight along the lip — any daylight under it is airflow being lost to the room instead of lifting water out of the carpet.

Why is there no price shown for the Drag Wand Nozzle Assembly?

Because it is not currently listed in the dealer catalog we price from. Call us at 763-535-0770 with your model and serial number and we will quote it and confirm availability at the same time.

How do I order the Drag Wand Nozzle Assembly (part# 983476M-01) or get help?

Call us at 763-535-0770 to order the Drag Wand Nozzle Assembly (part# 983476M-01) — this is a factory-order part and we will confirm current pricing and availability when you call. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.