Tornado Hose Assembly 1-1/2 in. x 10 ft Grey with Cuffs 1501WDS-T

Genuine Tornado OEM hose assembly, 1-1/2 inch by 10 feet, grey, with solution line and cuffs (part# 1501WDS-T). This is the short hose in the Tornado range — ten feet rather than twenty — and it is the one to fit when the operator is working close to the machine and a long run is just slack to trip over. The solution line and the cuffs come made up as part of the assembly.

When ten feet is the right length

Length is not a free upgrade. On stairs, in small offices, in vehicle interiors and anywhere the machine can sit beside the work, a twenty-foot hose means ten feet of loose hose on the floor behind you, catching on furniture and getting stood on. A ten-foot assembly is lighter in the hand, easier to coil at the end of a shift, and loses less suction than a long run simply because there is less of it. Keep a long hose for the jobs that need reach and a short one for the jobs that do not.

What the 1-1/2 inch size means for fitment

The 1-1/2 inch cuff is the standard Tornado extractor fitting, so this hose mates with the wands and tools across the Marathon range. That said, a cuff that physically fits is not the same as a rated match — check what pressure your pump delivers against the hose before you put a high-pressure wand on the end of it.

When to replace it

Replace the assembly if the outer jacket is split or worn through to the reinforcement, if there is a permanent kink, if the solution line weeps anywhere along its length or at a cuff, or if a cuff has worked loose on the hose. A hose that has been crushed in a doorway or stored kinked will fail at that point even if it looks serviceable.

Compatible Models

• Tornado 98166 20″ Marathon 800 (8 Gallon, 115V)
• Tornado 98168 20″ Marathon 1200 (12 Gallon, 115V)
• Tornado 98190 22″ Marathon 2000 (20 Gallon)

Not sure if this fits your machine? Call us at 763-535-0770 with your model and serial number and we will confirm compatibility before you order.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the rest of the Tornado 98166 accessories and consumables, or see the current range at tornadovac.com.

Frequently Asked Questions

What is the hose assembly (part# 1501WDS-T) and how long is it?

It is a ten-foot, 1-1/2 inch grey hose assembly with the solution line and cuffs made up as part of it. Ten feet is the short option in the Tornado range, against the twenty-foot assemblies.

Should I buy the 10-foot hose or a 20-foot one?

Ten feet suits work where the machine can sit beside you — stairs, small rooms, vehicle interiors. A twenty-foot hose on that work leaves ten feet of slack on the floor to catch and be stood on. Choose twenty feet when you genuinely need the reach.

Will the hose (part# 1501WDS-T) fit my wands and tools?

The 1-1/2 inch cuff is the standard Tornado extractor fitting, so it mates with the wands and tools across the Marathon range. Check pressure ratings as well as the fitting before putting a high-pressure wand on the end of it.

How do I order the 10-foot hose assembly (part# 1501WDS-T) or get help?

You can add the 10-foot hose assembly (part# 1501WDS-T) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.