Tornado Pac-Vac High-Up Tool Kit X6005-HU

The Tornado Pac-Vac High-Up Tool Kit X6005-HU is the genuine Tacony OEM overhead cleaning kit for the corded Pac-Vac Aircomfort backpack vacuums. It combines 1-1/4 inch locking extension wands with a matched set of high-up tools to give roughly 22 feet of working reach, so an operator already wearing the machine can clean overhead without ever leaving the floor.

That is what turns a Pac-Vac from a floor machine into a whole-room machine. Air vents and returns, sprinkler heads and pipe runs, ledges and door frames, light fittings, the tops of lockers and partitions, and ceiling corners all become reachable in the same pass as the floor. In a school, a hospital corridor, a warehouse or a hotel atrium that is the difference between an hour of ladder work with a spotter and a few minutes with the backpack already on — and it removes a working-at-height task from the job sheet, which is usually the argument that actually carries with a facilities manager.

Because this is a factory Tacony kit rather than a generic extension pole, the wands lock positively rather than friction-fitting. At full extension that matters: a friction joint at 22 feet is a dropped tool, and a locking joint holds its position while the assembly is angled into a ceiling corner. The tools use the same clip system as the rest of the Pac-Vac tool range, so they behave the way the operator already expects.

Compatible Models for the Tornado Pac-Vac High-Up Tool Kit X6005-HU

• Tornado Pac-Vac 6 Aircomfort — Model 93012B (Corded Pac Vac Optional Items)
• Tornado Pac-Vac 10 Aircomfort — Model 93014B (Corded Pac Vac Optional Items)

This is an option for the corded Pac-Vac machines. Not sure whether it suits your machine or your site? Call us at 763-535-0770 and we will talk it through before you commit to it.

Ordering and support

X6005-HU is supplied as one complete kit under a single part number, so there is nothing to specify beyond the machine it is going on. Twin City Vacuum has been selling and servicing Tornado equipment since 1956, and on a purchase at this level we would rather have a two-minute conversation about how you intend to use it than sell you the wrong reach — call 763-535-0770 or come and see it at 5415 West Broadway, Crystal, MN 55428. Browse the rest of the Tornado Pac-Vac Aircomfort parts range, see the everyday tools on the 93012B Accessories and Consumables page, or find machine specifications at tornadovac.com.

Frequently Asked Questions

What is included in the Tornado Pac-Vac High-Up Tool Kit (part# X6005-HU)?

It is supplied as one complete kit under a single part number: 1-1/4 inch locking extension wands plus the high-up tool set that fits them, giving roughly 22 feet of working reach from floor level. Because Tacony sells it as an assembly rather than as components, the kit ships complete.

Which machines does the High-Up Tool Kit fit?

The factory parts book lists X6005-HU as a Corded Pac Vac Optional Item for the Tornado Pac-Vac 6 Aircomfort 93012B and the Tornado Pac-Vac 10 Aircomfort 93014B. It is an option for the corded machines. If you want it confirmed against your exact model and serial number before ordering, call 763-535-0770.

Why use a high-up tool kit instead of a ladder?

Because it takes the ladder out of the job. Vents, sprinkler heads, ledges, ductwork and light fittings are where dust accumulates unseen, and reaching them from the floor with locking wands is faster and materially safer than setting and re-setting a ladder in an occupied building. For most cleaning contractors that is a working-at-height policy question as much as a productivity one.

Why do the wands lock instead of friction-fitting?

Because at 22 feet a friction joint is a dropped tool. The locking wands hold their extension positively, so the tool stays where you put it while you are working overhead and the assembly does not collapse under its own weight when you angle it.

How do I order the Tornado Pac-Vac High-Up Tool Kit (part# X6005-HU) or get help?

You can add the Tornado Pac-Vac High-Up Tool Kit (part# X6005-HU) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.