Tornado PS Spotter 98220 Vacuum Motor Gasket 19518

The Tornado PS Spotter 98220 Vacuum Motor Gasket 19518 is the genuine OEM gasket that seals the vacuum motor to its mounting face on the PS Series professional spotter. Tornado’s dealer catalog lists it as “Gasket Vacuum Motor”, and it is the one gasket on this machine whose condition is felt directly at the tool.

Compatible Models for the Vacuum Motor Gasket

• Tornado PS Spotter 98220 — PS Series professional spotter, 115V, on the recovery tank assembly

Tornado’s factory cross-reference returns this gasket for the 98220 only. Vacuum motor gaskets are specific to the motor and the mounting face they sit between, so a gasket from another machine that looks the same size is not a substitute. If you are working on a different model, call us at 763-535-0770 with the model and serial number and we will find the right one for it.

Why this gasket decides how well the machine lifts water

The vacuum motor pulls air out of the recovery tank, and the only path that air is supposed to take is up the hose, through the tool and across the carpet. This gasket seals the joint between the motor and its mounting face. If it leaks, the motor takes the easy route and draws air straight from inside the machine instead — and because it is still moving the same volume of air, it still sounds completely normal. That is what makes this failure deceptive: the machine runs, the motor note is right, and the recovery is poor.

A leak here also pulls moist, soil-laden air through a path it was never meant to take, which puts water where the motor does not want it. A vacuum motor that has been running behind a failed gasket often fails itself not long after.

When to replace it

Replace the gasket when the machine leaves the carpet wetter than it used to with a clean filter, a clear hose and a correctly seated tank — that combination is the classic signature of a leak on the motor side rather than the tool side. On inspection, replace it if it has hardened, cracked, torn, compressed permanently flat, or crept out of its seat.

Always fit a new gasket when the vacuum motor is removed for any reason, including a motor replacement or a brush change. The old gasket has already taken its set around the old joint and will not seal reliably a second time, and the cost of the gasket is trivial next to pulling the motor again.

Fitting notes

Clean both faces down to bare material before fitting — grit or old gasket residue holds the joint open by exactly the amount that causes the leak you are trying to cure. Seat the gasket without stretching it, then draw the motor fasteners down evenly in a cross pattern rather than one at a time, so the gasket compresses square. Check the recovery tank’s own sealing gasket at the same visit; the two failures produce the same symptom, and it is worth ruling both in or out while the machine is open. Twin City Vacuum has been selling and servicing Tornado equipment since 1956.

You can browse every assembly for this machine on our Tornado PS Spotter 98220 parts page, and the manufacturer’s specifications are published at tornadovac.com.

Frequently Asked Questions

What does the Vacuum Motor Gasket 19518 do on the Tornado PS Spotter 98220?

It seals the joint between the vacuum motor and its mounting face so the motor draws its air through the hose and tool rather than from inside the machine.

How do I know if my Vacuum Motor Gasket is leaking?

The machine sounds completely normal but leaves the carpet or upholstery wetter than it should, with a clean filter, a clear hose and a properly seated tank. Because the motor still moves the same volume of air, the sound gives nothing away — poor water recovery is the symptom.

Should I replace the gasket when I change the vacuum motor?

Yes. The old gasket has already taken a permanent set around the previous joint and will not seal dependably again, and a leak at this joint can shorten the life of the new motor by drawing moist air past it.

How do I order the Vacuum Motor Gasket (part# 19518) or get help?

You can add the Vacuum Motor Gasket (part# 19518) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.