Tornado Tempest Battery Release Button K53242030

The Tornado Tempest battery release button (part# K53242030) is the press button that withdraws the battery latch (part# K50369480) so the 36V pack can be lifted out of the TV400-W26-U cordless sweeper. It is returned by its own spring (part# K63301600), separate from the latch spring.

Of all the parts on the battery housing this is the one an operator touches most — several times a shift on a machine running multiple packs. It is moulded, it works against a spring, and it takes a thumb load at an angle every single time. Wear here is normal service wear rather than a fault, and it is cheap to stay ahead of.

Compatible Models for the Battery Release Button

• Tornado Tempest Wide-Area Cordless Carpet Vacuum Sweeper — Model TV400-W26-U

Symptoms that point to the release button

• The button has to be pressed hard, or at an angle, to release the pack.
• It sticks in rather than springing back out.
• The button face is cracked, dished or has broken away.
• Pressing it no longer withdraws the latch at all.
• The button is loose and rattles in its aperture.

A button that sticks in is more often the return spring (part# K63301600) than the button itself. Check whether the button moves freely when the spring is removed before ordering — and if the machine is open anyway, fit both.

Fitting notes

Remove the battery pack first. The button sits in the battery mount (part# K50321850) with its return spring behind it, bearing on the latch. Note how far the button protrudes before you dismantle it — it must have enough travel to fully withdraw the latch without bottoming out against the housing. After fitting, confirm the pack releases with a normal thumb press and that the button returns fully on its own.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Tempest parts range, or see the Tornado Tempest TV400-W26-U machine. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

What does the battery release button do on the Tornado Tempest?

Pressing it withdraws the battery latch so the 36V pack can be lifted out. Its own return spring pushes it back out again so the latch re-engages when the next pack is fitted.

How do I know if my battery release button needs replacing?

If it needs a hard or angled press, sticks in rather than springing back, rattles loose in its aperture, or its face is cracked or dished. If it moves freely once the return spring is out, the spring is the fault rather than the button.

What models is the battery release button (part# K53242030) compatible with?

The Tornado Tempest TV400-W26-U wide-area cordless carpet sweeper. PartSmart lists it against the Tempest alone.

How often does this part need replacing?

It is normal service wear rather than a failure. On a machine running several packs a shift the button is operated many times a day, so on a hard-working Tempest it is reasonable to renew it with the latch and springs as a set during a major service.

How do I order the battery release button (part# K53242030) or get help?

You can add the battery release button (part# K53242030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.