Tornado Tempest Brushroll Clamp K65334380

The Tornado Tempest brushroll clamp (part# K65334380) secures the brush motor loom on the brushroll assembly of the TV400-W26-U cordless sweeper. The Tempest uses two parts catalogued simply as Clamp; this is the one on the brushroll sheet, and the other (part# K63738670) belongs to the filter and blower assembly.

A clamp on a brushroll assembly is doing a job with very little margin for error. The brush motor draws the machine’s largest current, and its loom runs past a roller turning at working speed a few inches away. The clamp is what keeps those two apart. A loom that has come adrift does not stay adrift for long on a machine that is being used — it finds the brush, and the repair becomes a loom rather than a clamp.

Compatible Models for the Brushroll Clamp

• Tornado Tempest Wide-Area Cordless Carpet Vacuum Sweeper — Model TV400-W26-U

When to replace it

• The clamp is cracked, distorted or has lost its grip.
• The loom has moved from its routed position.
• Its fastener will not hold tension.
• The clamp is missing after a previous repair.
• Any sign of chafing on the cable where it passes the clamp.

Chafe marks are worth acting on the moment they are found. On a 36V loom beside a brushroll, a worn-through insulation is a fault that escalates quickly.

Fitting notes

Remove the battery pack before starting. Photograph the loom routing before disturbing it. Fit the clamp so the cable is held on its original path with clearance to the brushroll through the brush’s full travel — check it with the brush height at both ends of its adjustment range, not just where it happens to sit. Tighten enough to hold without crushing the insulation.

On pricing: Tacony does not currently list part# K65334380 in the dealer catalogue, so we do not publish a price for it rather than estimate one. Call 763-535-0770 and we will source it and quote you.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Tempest parts range, or see the Tornado Tempest TV400-W26-U machine. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

What does the brushroll clamp do on the Tornado Tempest?

It secures the brush motor loom on the brushroll assembly, holding the cable on its routed path and clear of the turning roller.

How do I know if it needs replacing?

If it is cracked or distorted, has lost its grip, will not hold tension, or is missing. Any chafing on the cable where it passes the clamp is a reason to act immediately.

What models is this clamp (part# K65334380) compatible with?

The Tornado Tempest TV400-W26-U wide-area cordless carpet sweeper. PartSmart lists it against the Tempest alone.

The Tempest lists two clamps — which is this?

Part# K65334380 is the one on the brushroll assembly. The other, part# K63738670, is on the filter and blower. They are not interchangeable.

How do I order the brushroll clamp (part# K65334380) or get help?

You can add the brushroll clamp (part# K65334380) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.