Tornado Tempest Hopper Release Lever K50321830

The Tornado Tempest hopper release lever (part# K50321830) is the handle that unlatches and lifts the debris container out of the TV400-W26-U cordless sweeper. Tacony lists it as Release Lever, Hopper; the parts book calls it the sweep tank handle. It works against its own spring (part# K53321850), which returns it and keeps the hopper latched while the machine is running.

This is one of the highest-duty-cycle parts on the machine. On a full shift the hopper may be emptied many times, and every one of those cycles loads the lever through a full stroke, usually with a hand that is in a hurry. Combined with the grit that gets into everything on a sweeper, that makes lever wear normal rather than exceptional.

Compatible Models for the Hopper Release Lever

• Tornado Tempest Wide-Area Cordless Carpet Vacuum Sweeper — Model TV400-W26-U

Symptoms that point to the release lever

• The hopper is hard to release, or needs the lever worked at an angle.
• The lever does not return fully to its rest position.
• The hopper can be lifted out without operating the lever.
• The lever is cracked, or its pivot is visibly elongated.
• The lever feels gritty or notchy through its travel.

A lever that does not return is usually the spring (part# K53321850) rather than the lever. Check whether the lever moves freely with the spring disconnected before ordering.

Fitting notes

Remove the battery pack before starting. The lever mounts on the hopper (part# K50321860) with its spring behind it. Note how the spring is hooked before dismantling — it can be fitted the wrong way round and will then hold the lever open instead of closed. After fitting, cycle the lever several times and confirm the hopper latches positively and releases cleanly before returning the machine to service.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Tempest parts range, or see the Tornado Tempest TV400-W26-U machine. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

What does the hopper release lever do on the Tornado Tempest?

It unlatches the debris container and provides the handle for lifting it out. Its spring returns it and keeps the hopper latched while the machine is running.

How do I know if my hopper release lever needs replacing?

If the hopper is hard to release, the lever does not return fully, the hopper lifts out without operating the lever, or the pivot is visibly elongated. If the lever moves freely with the spring disconnected, the spring is the fault instead.

What models is the hopper release lever (part# K50321830) compatible with?

The Tornado Tempest TV400-W26-U wide-area cordless carpet sweeper. PartSmart lists it against the Tempest alone.

Why does this part wear out?

It is among the most-used parts on the machine. On a busy shift the hopper is emptied many times and each cycle works the lever through a full stroke, in an environment full of carpet grit. Wear here is normal service life rather than a defect.

How do I order the hopper release lever (part# K50321830) or get help?

You can add the hopper release lever (part# K50321830) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.