Tornado Tempest Spring Clip 15 x 1 K73430040

The Tornado Tempest spring clip 15 x 1 (part# K73430040) is the retaining clip on the brushroll assembly of the TV400-W26-U cordless sweeper. Tacony’s own record gives its size as SPRING CLIP 15X1 — a 15mm clip in 1mm section, which is what distinguishes it from the three other spring clips on the machine.

Having a published size for this one is useful, because the Tempest’s four spring clips are otherwise catalogued under the same two words and are not interchangeable. A clip of the wrong diameter either will not enter the groove or will sit in it without gripping, and the second of those is the dangerous case because it looks correct.

Compatible Models for the Spring Clip 15 x 1

• Tornado Tempest Wide-Area Cordless Carpet Vacuum Sweeper — Model TV400-W26-U

When to replace it

• Any time it has been removed — fit a new one rather than reusing it.
• It does not snap positively into its groove.
• The clip is opened out, distorted or cracked.
• The component it retains has developed end float.
• A clip has been found missing during service.

Fitting notes

Remove the battery pack before starting. Use the correct pliers rather than levering with a screwdriver. Seat the clip fully all the way round and check the retained component for axial play. Do not substitute a clip of a different size — the groove is machined for 15 x 1.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Tempest parts range, or see the Tornado Tempest TV400-W26-U machine. Manufacturer information is at tornadovac.com.

Frequently Asked Questions

What does this spring clip do on the Tornado Tempest?

It retains a shaft or pin on the brushroll assembly, springing into a machined groove so the component is held without being clamped.

How do I know if it needs replacing?

If it does not snap positively into its groove, is opened out or distorted, or if the component it retains has end float. Fit a new clip whenever one has been removed.

What models is this spring clip (part# K73430040) compatible with?

The Tornado Tempest TV400-W26-U wide-area cordless carpet sweeper. PartSmart lists it against the Tempest alone.

The Tempest lists four spring clips — which is this?

This is the 15 x 1, on the brushroll assembly — Tacony publishes that size for this one, which is what separates it from the other three. They are not interchangeable.

How do I order the spring clip (part# K73430040) or get help?

You can add the spring clip (part# K73430040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.