Tornado Vacuum and Solution Hose Assembly 20 ft 100 PSI 95567A

Genuine Tornado OEM 20-foot vacuum and solution high-pressure hose assembly, rated to 100 p.s.i. (part# 95567A). This is a combined hose: the vacuum line and the pressurised solution line are bound together as one assembly with the cuffs and fittings already made up, so a single hose run carries both services out to the wand instead of two loose lines dragging behind the operator.

Why the combined assembly is worth having

Two separate lines snag on furniture legs, twist around each other and get stood on. A bound assembly tracks as one run, which matters most on the twenty-foot length where a loose solution line has plenty of slack to find trouble. It also means one set of connections to check instead of two, and one hose to replace when the outer jacket finally goes.

Pressure rating and what it rules out

The 100 p.s.i. rating is the limit on the solution side, and it is the number to check before ordering. Fitting a 100 p.s.i. hose to a machine or a wand running at 200, 400 or 500 p.s.i. is the single most common way these assemblies fail, and they fail at the hose rather than at the tool. If you are adding a high-pressure wand to your setup, check the hose rating at the same time.

When to replace it

Replace the assembly if the outer jacket is split, abraded through to the reinforcement, or kinked so that it will not straighten; if the solution line weeps anywhere along its length or at a cuff; or if a cuff has gone loose on the hose. A hose that has been run over, crushed in a doorway or left kinked in storage is a safety item on the solution side, not just a performance one.

Compatible Models

• Tornado 98166 20″ Marathon 800 (8 Gallon, 115V)
• Tornado 98168 20″ Marathon 1200 (12 Gallon, 115V)
• Tornado 98190 22″ Marathon 2000 (20 Gallon)
• Tornado 98172 Marathon Carpet Rinser/Dryer (10 Gallon)
• Tornado 98175 Marathon Carpet Rinser/Dryer (13 Gallon)
• Tornado 98240 Model 2-100 CarpetRinser/Dryer (12 Gallon)

Not sure if this fits your machine? Call us at 763-535-0770 with your model and serial number and we will confirm compatibility before you order.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the rest of the Tornado 98166 accessories and consumables, or see the current range at tornadovac.com.

Frequently Asked Questions

What does the 20-foot hose assembly (part# 95567A) include?

Both services in one bound assembly — the vacuum line and the pressurised solution line together, with the cuffs and fittings already made up. One hose run carries both out to the wand instead of two loose lines.

Can I use the hose (part# 95567A) with a high-pressure wand?

Only up to 100 p.s.i. on the solution side. Fitting a 100 p.s.i. hose behind a 200, 400 or 500 p.s.i. wand is the most common way these assemblies fail, and they fail at the hose. Check the hose rating whenever you change wands.

How do I know when the hose (part# 95567A) needs replacing?

A split or abraded outer jacket, a permanent kink that will not straighten, any weeping along the solution line or at a cuff, or a cuff that has gone loose on the hose. On the solution side a damaged hose is a safety item, not just a performance one.

How do I order the 20-foot vacuum and solution hose assembly (part# 95567A) or get help?

You can add the 20-foot vacuum and solution hose assembly (part# 95567A) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.