Tornado Wand Assembly 39312

The Tornado Wand Assembly (part# 39312) is a genuine Tacony OEM replacement wand that routes suction from the vacuum hose up to the cleaning tools on the CK 14/1 Pro and CK 14/2 Pro commercial uprights. As the rigid channel between the handle and the on-board attachments, it is what lets an operator reach above-floor surfaces — drapes, upholstery, corners, stairs, and off-the-aisle spots — without losing airflow at the nozzle.

The wand seats into the upper handle housing and connects to the vacuum hose (part# 39317) at one end and the bag-adapter/tool cuff at the other. Air pulled by the motor travels through the wand’s molded internal passage, so a clean, crack-free wand is essential to keeping suction strong at the tool end. Because the body is molded ABS, the most common failure is a hairline crack from a drop or from being stepped on — easy to overlook until suction drops.

Compatible Models for the Tornado Wand Assembly

• Tornado CK 14/1 Pro — Model 98147
• Tornado CK 14/2 Pro — Model 98152

Replace the Wand Assembly when you notice suction falling off only while the tools are in use, a visible crack or split along the wand, air whistling from a seam, or a wand that no longer locks firmly into the handle and wobbles during use. Installation is straightforward and takes about ten minutes: release the wand from the handle cuff, disconnect the hose end, seat the new wand, and reconnect — no special tools required.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse more Tornado cleaning equipment parts, or learn about the machines on the Tornado manufacturer site.

Frequently Asked Questions

What does the Tornado Wand Assembly (part# 39312) do?

It is the rigid wand that carries suction from the hose to the cleaning tools on the CK 14/1 Pro and CK 14/2 Pro, letting you clean above-floor surfaces and hard-to-reach areas while keeping full airflow to the attachment.

How do I know if my Wand Assembly (part# 39312) needs replacing?

Tell-tale signs are reduced suction only when using the tools, a crack or split in the wand body, air leaking from a seam, or a wand that will not lock into the handle and wobbles. A cracked ABS wand is the most frequent cause.

What models is the Wand Assembly (part# 39312) compatible with?

It fits two Tornado commercial uprights — the CK 14/1 Pro (Model 98147) and the CK 14/2 Pro (Model 98152). A single wand covers both machines.

How do I order the Wand Assembly (part# 39312) or get help?

You can add the Wand Assembly (part# 39312) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.