Tornado Zephyr Switch Harness and Wiring Assembly K46457360
$153.99
Genuine Tacony OEM switch harness and wiring assembly (part# K46457360) — the complete switch and loom for the Tornado Zephyr (TV570-Q03-U). Call 763-535-0770.
The switch harness and wiring assembly (part# K46457360) is the complete switch and wiring unit of the Tornado Zephyr — the control the operator actually presses and the loom behind it.
This is a genuine Tacony OEM part for the Tornado Zephyr.
Compatible Models for the Switch Harness and Wiring Assembly K46457360
- Tornado: TV570-Q03-U Zephyr cordless backpack vacuum
PartSmart lists this part on the Zephyr and on no other machine, so the fit is specific rather than shared. If your machine is a different Tornado cordless model, call 763-535-0770 with the model number and we will find the right part for it.
What the switch harness and wiring assembly does
It carries the operator’s input to the control board and routes the wiring through the harness to where the machine needs it. It is supplied as an assembly because the switch, its loom and its connectors are matched to each other and to the board.
Signs it needs replacing
Replace it when the machine does not respond to the switch though the pack and board are good, when it runs only if the switch is held at a certain angle, or when the loom is chafed or a connector is damaged. Intermittent operation that follows movement of the harness points here.
Installation and fit
Take the pack off first. Photograph the routing before disturbing anything, transfer connectors one at a time, and keep the loom in its original path so it does not chafe on the shell or foul the straps.
Frequently Asked Questions
How do I tell the switch from the control board?
If the machine is completely dead with a good pack, suspect the board. If it responds sometimes, or only when the switch is worked in a particular way, suspect this assembly.
Can just the switch be replaced?
Tacony supplies it as an assembly — switch and wiring together — so that is what we fit.
Is it the same as the harness and straps?
No. K65410183 is the wearable harness with its straps; this is the electrical switch assembly.
Which machines use it?
The Tornado Zephyr TV570-Q03-U only.






Reviews
There are no reviews yet