Washer 60305001

$1.99

Genuine OEM washer (part# 60305001) for Tornado floor scrubbers. It spreads fastener load at battery-area mountings and is used across many Tornado machines.

Genuine OEM washer (part# 60305001) for Tornado floor scrubbers — compatible machines are listed below. It is used under fastener heads and nuts at more than one position, including on the battery charger assembly, and appears across a wide range of Tornado equipment.

The job is to spread the fastener’s clamping load over a wider bearing area so the head or nut does not sink into what it is holding, and to give the fastener a flat, smooth face to turn against so the torque applied becomes clamp load rather than friction against a rough seat. On brackets carrying heavy components — which is most of what the battery area contains — the first of those is what keeps a joint tight: without enough bearing area the head pulls a dent into the bracket, the clamp load goes into the dent, and the joint is loose a few weeks later with nobody having touched it.

There is also an electrical consideration. In a battery compartment, some fastenings are part of a ground or bonding path, and a washer that is corroded or left out reduces the contact area and raises the resistance of that path — which can produce faults that look electronic and are mechanical.

Acid mist from charging attacks washers along with everything else here, so inspect them whenever the compartment is open rather than assuming they are fine because they are simple.

Replace a washer that is dished, cracked, burred around the bore, or corroded enough to have lost its flat face. Dishing means it has yielded and now contacts only at its rim.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 25 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the battery charger drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the washer (part# 60305001) do?

It spreads the fastener’s clamping load over a wider bearing area so the head does not sink into the bracket, and gives the fastener a flat face to turn against so torque becomes clamp load.

Why does a missing washer make a joint go loose?

Because without enough bearing area the fastener head pulls a dent into the bracket, and the clamp load goes into the dent. The joint is then loose a few weeks later with nobody having touched it.

Can a corroded washer cause an electrical problem?

In a battery compartment it can. Some fastenings are part of a ground or bonding path, and a corroded or missing washer reduces the contact area and raises the resistance of that path — producing faults that look electronic but are mechanical.

How do I order the Washer (part# 60305001) or get help?

You can add the Washer (part# 60305001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60305001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Washer 60305001”

Your email address will not be published. Required fields are marked *