Washer 60306003

$1.99

Genuine OEM washer (part# 60306003) for Tornado floor scrubbers. It spreads fastener load at mountings on the solution tank assembly.

Genuine OEM washer (part# 60306003) for Tornado floor scrubbers — compatible machines are listed below. On the solution tank assembly it goes under the head or nut of a fastener at more than one position.

A flat washer spreads the fastener’s clamping load across a wider bearing area and gives the head or nut a flat, smooth surface to turn against. On a tank assembly the first of those matters a great deal, because much of what the fasteners bear against is moulded plastic. Without a washer, the small area under a screw head concentrates the load into the moulding, and plastic responds by creeping: the material flows slowly away from the pressure, the fastener loses its clamp, and the joint is loose a few weeks later with nobody having touched it. Worse, the dent left behind is a stress raiser in a wall that holds liquid.

That is why a missing washer here is not a cosmetic omission. Washers are the part most often left out of a reassembly; count them back in.

Size is not interchangeable even when the bore fits. Outside diameter determines how far the load is spread — which is exactly the point on plastic — and thickness is part of the stack height the assembly was designed around. The tank assembly uses more than one washer part number; order by number.

Replace a washer that is dished, cracked, burred around the bore, or badly scored on its bearing face. Dishing means it has already yielded and will not spread load the way a flat one does.

Compatible Models

  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 24 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the washer (part# 60306003) do?

It spreads the fastener’s clamping load over a wider bearing area and gives the head or nut a flat face to turn against. On a tank assembly, where fasteners often bear against moulded plastic, the load-spreading matters a great deal.

Why is a missing washer worse on a plastic tank?

Because plastic creeps. The concentrated load under a bare screw head makes the material flow slowly away, the fastener loses its clamp, and the joint goes loose weeks later — and the dent left behind is a stress raiser in a wall that holds liquid.

Can I use any washer with the right bore?

No. Outside diameter determines how far the load spreads, which is the whole point on plastic, and thickness is part of the stack height. The tank assembly uses more than one washer part number, so order by number.

How do I order the Washer (part# 60306003) or get help?

You can add the Washer (part# 60306003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60306003) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Washer 60306003”

Your email address will not be published. Required fields are marked *