Washer 60310004

$1.99

Genuine OEM flat washer (part# 60310004) for Tornado floor scrubbers. It is the larger-bore washer used at the main arm pivot of the squeegee control linkage and at the tilt adjuster stack.

Genuine OEM flat washer (part# 60310004), used across a range of Tornado floor scrubbers — the full machine list is below. On the squeegee control assembly it is fitted at the main arm pivot and again in the tilt adjuster stack, two of the most heavily loaded points in the whole group.

Both of those positions ask the same thing of it: hold a clamp load steady while something next to it moves. At the arm pivot, the arm swings through its full travel every time the squeegee is raised or lowered. In the adjuster stack, the washer sits between the threaded bar hardware and the bracket, resisting the constant small vibration that would otherwise let the blade-angle setting creep. A washer that has gone soft in either place shows up as a squeegee that does not stay where it was set.

Inspection is quick. A good washer is flat and sits dead against a bench. Replace it if it rocks, if it has a polished or scored face, if the bore has become bell-mouthed, or if there is any sign of the fastener head having dug into it. At the adjuster in particular, look for a washer that has taken a slight cone shape — that is a classic result of a lock nut being torqued down repeatedly over the years to chase a setting that keeps slipping, and it means the whole stack wants renewing rather than retightening.

When rebuilding, clean the faces it bears against as well. Grit trapped under a washer behaves like a tiny chisel under vibration and will score both the washer and the part beneath it. Reassemble with the adjuster free to turn and reset the blade angle on a wet test lane afterwards.

This is the genuine Tornado part, so the bore, outside diameter and thickness match the original and the pivot clearances and adjuster travel stay exactly as designed.

Compatible Models

  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado TS350-W20-U — 99694
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 21 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where is the washer (part# 60310004) used on a Tornado floor scrubber?

On the squeegee control assembly it is fitted at the main arm pivot and again in the squeegee tilt adjuster stack — two of the most heavily loaded points in the group.

How do I know if the washer (part# 60310004) needs replacing?

It should sit dead flat on a bench. Replace it if it rocks, if a face is polished or scored, if the bore has gone bell-mouthed, or if the fastener head has dug into it. A slight cone shape at the adjuster means the whole stack needs renewing, not retightening.

My squeegee angle will not stay set. Could this washer be the cause?

It can contribute. A washer that has gone soft or coned in the adjuster stack lets the setting creep under vibration. Check it along with the threaded bar, the lock nuts and the tilt adjuster spring, since these usually wear as a group.

How do I order the Washer (part# 60310004) or get help?

You can add the Washer (part# 60310004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60310004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Washer 60310004”

Your email address will not be published. Required fields are marked *