Washer 60313003
$1.99
Genuine OEM flat washer (part# 60313003) for Tornado floor scrubbers. It spreads the clamp load of a fastener across the linkage arm in the squeegee control assembly and gives the joint a clean bearing face to turn against.
Genuine OEM flat washer (part# 60313003), fitted across a range of Tornado floor scrubbers — see the full machine list below. On the squeegee control assembly it is used at pivot and adjuster points, sitting between a fastener and the linkage arm.
A flat washer in a pivot does two jobs that are easy to underestimate. First it spreads the clamp load of the nut or screw head over a wider area of the arm, so the fastener does not dig into the metal and start a wear crater that eventually becomes a loose joint. Second, at a joint that actually turns, it provides a flat, hard bearing face for the moving part to rub against — a sacrificial surface that is far cheaper to renew than the arm it protects.
That second role is why washers in a squeegee linkage genuinely wear out rather than lasting forever. Watch for a washer that has gone from flat to dished or cupped, one with a bright polished ring worn into one face, one that has thinned noticeably compared with a new part, or one that has started to turn with the fastener instead of staying put. Any of those means it has stopped spreading the load and started concentrating it.
Washers are also the component most often left out during a rushed reassembly, usually because one dropped on the floor and was not missed. A pivot reassembled without its washer will have the nut bearing directly on the arm, and the resulting wear is the kind that needs a new arm rather than a new washer. When stripping the linkage, count what comes off and lay it out in order.
This is the genuine Tornado part, in the correct diameter and thickness, so the fastener stack height and the geometry of the joint stay exactly where they were designed to be.
Compatible Models
- Tornado BD 26/26 — 99726
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado 99680blt — TS120-S53-U
- Tornado TS530-W30-U
This part is shared across 14 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the washer (part# 60313003) do on a Tornado floor scrubber?
It spreads the clamp load of a fastener across the linkage arm in the squeegee control assembly, and at a turning joint it gives the moving part a hard, flat face to bear against so the arm itself is not worn.
How do I know if the washer (part# 60313003) needs replacing?
Replace it if it has gone dished or cupped instead of flat, has a bright polished wear ring on one face, is noticeably thinner than a new one, or turns with the fastener instead of staying put. Each of those means it is concentrating load rather than spreading it.
Does it matter if a washer is left out during reassembly?
Yes, more than most people expect. Without it the nut or screw head bears directly on the arm and digs in, and the repair for that is a new arm rather than a new washer. Lay the parts out in order when stripping the linkage so nothing is missed.
How do I order the Washer (part# 60313003) or get help?
You can add the Washer (part# 60313003) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60313003) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet