Washer 60324001

$2.99

Genuine OEM washer (part# 60324001) for Tornado floor scrubbers. It is the large-diameter washer used at a heavily loaded point in the steering group, spreading load over a much wider face than a standard washer.

Genuine OEM washer (part# 60324001), fitted to a range of Tornado floor scrubbers — the machine list is below. On the steering wheel assembly it is used at a high-load fastening point, and it is a notably larger washer than the general-purpose one used elsewhere in the same group.

The size difference is the whole point and the reason this is a separate part number. A larger outside diameter spreads the same clamp force over much more area, which is what you want where a fastener bears on a thin bracket, a plastic component, or a hole that is larger than the fastener. Substituting a standard washer here concentrates the load into a small ring and starts exactly the wear the big washer exists to prevent.

Inspect it whenever that joint is opened. Look for dishing — a large washer dishes more visibly than a small one, and once it has coned it is loading a ring rather than a face. Look also for a polished wear band, for cracking radiating from the bore, for thinning, and for any sign the washer has been turning with the fastener. If the component underneath shows an impression of the washer, the clamp load has been too high or the washer too small, and both want addressing.

Keep it separate from the smaller washers on the bench. In a tray of similar-looking hardware the easiest mistake is to put the standard washer where the big one belongs, and the joint will feel perfectly fine on assembly while quietly wearing from the first hour.

This is the genuine Tornado part at the correct outside diameter and thickness, so the joint clamps the way it was designed to.

Compatible Models

This part is shared across 5 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

How is the washer (part# 60324001) different from the other washers in the steering group?

It is a notably larger diameter washer used at a high-load fastening point. The bigger face spreads the same clamp force over much more area, which matters where a fastener bears on a thin bracket, a plastic part, or an oversized hole.

Can I use a standard washer instead?

No. A standard washer concentrates the load into a small ring and starts exactly the wear the large washer exists to prevent. The joint will feel fine on assembly and wear from the first hour.

How do I know if the washer (part# 60324001) needs replacing?

Look for dishing or coning, a polished wear band, cracking radiating from the bore, thinning, or signs it has been turning with the fastener. If the part underneath carries an impression of the washer, address the clamp load as well.

How do I order the Washer (part# 60324001) or get help?

You can add the Washer (part# 60324001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60324001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Washer 60324001”

Your email address will not be published. Required fields are marked *