Washer INOX 60304005

$1.99

Genuine OEM stainless washer (part# 60304005) for Tornado floor scrubbers. It spreads fastener load at scrub head joints that stay permanently wet.

Genuine OEM stainless (INOX) washer (part# 60304005) for Tornado floor scrubbers — compatible machines are listed below. It is used under fastener heads and nuts at positions on the brush base.

What a flat washer contributes is easy to underrate. It spreads the clamping load across a wider bearing area, so the fastener head does not sink into the bracket it is holding; and it gives the head or nut a flat, smooth face to turn against, so the joint reaches real tension rather than feeling tight against a rough or painted seat. The first of those is why a joint that was tightened properly can be loose a week later: the head has pulled a dent into its mounting and the clamp load has gone into the dent.

Washer sizes are not interchangeable even when the bore fits. Outside diameter sets how far the load is spread, and thickness is part of the stack height the assembly was designed around — on a scrub head, where several parts are sandwiched together, a thicker washer can leave a joint under-clamped or a fastener short of thread.

Stainless is specified because the scrub head is washed with solution all day and hosed at the end of a shift. A plated washer loses its coating at the first wrench mark, then rusts and bonds the stack together, and it also forms a galvanic pair under a stainless fastener so the joint corrodes faster than it would either way.

Replace a washer that is dished, cracked, burred around the bore, or badly scored. Dishing means it has already yielded.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the washer (part# 60304005) do?

It spreads the fastener’s clamping load over a wider area so the head does not sink into its bracket, and gives the head or nut a flat, smooth face to turn against so the joint reaches real tension.

My joint was tight and is loose a week later. Why?

Often a missing or wrong washer. Without enough bearing area the fastener head pulls a dent into the mounting and the clamp load goes into the dent. Fit the correct washer and check the mounting face.

Can I use any washer with the right bore?

No. Outside diameter sets how far the load is spread, and thickness is part of the stack height the assembly was designed around — on a scrub head a thicker washer can leave a joint under-clamped or a fastener short of thread.

How do I order the Washer INOX (part# 60304005) or get help?

You can add the Washer INOX (part# 60304005) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer inox (part# 60304005) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the washer (part# 60304005) do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It spreads the fastener’s clamping load over a wider area so the head does not sink into its bracket, and gives the head or nut a flat, smooth face to turn against so the joint reaches real tension.”}},{“@type”:”Question”,”name”:”My joint was tight and is loose a week later. Why?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Often a missing or wrong washer. Without enough bearing area the fastener head pulls a dent into the mounting and the clamp load goes into the dent. Fit the correct washer and check the mounting face.”}},{“@type”:”Question”,”name”:”Can I use any washer with the right bore?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. Outside diameter sets how far the load is spread, and thickness is part of the stack height the assembly was designed around — on a scrub head a thicker washer can leave a joint under-clamped or a fastener short of thread.”}},{“@type”:”Question”,”name”:”How do I order the Washer INOX (part# 60304005) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the Washer INOX (part# 60304005) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Washer INOX 60304005”

Your email address will not be published. Required fields are marked *