Water Level Hose 47610460
$64.99
Genuine OEM water level hose (part# 47610460) for Tornado floor scrubbers. It is the clear sight hose that shows how much solution is left in the tank.
Genuine OEM water level hose (part# 47610460) for Tornado floor scrubbers — compatible machines are listed below. It is the clear hose running down the outside of the solution tank that acts as a sight gauge: the liquid in the hose sits at the same height as the liquid in the tank, so the operator can see at a glance how much solution is left.
Simple, and worth keeping working. An operator who cannot see the level either runs the tank dry mid-aisle — scrubbing a dry floor until somebody notices, which cleans badly and wears brushes — or tops up constantly to be safe, which wastes time and chemical. Neither shows up as a fault anyone reports; the machine just gets used worse.
The hose fails in ways that all end in the same place. It clouds and yellows with age and chemical exposure until the level simply is not visible. Scale and detergent residue build up inside it, which both obscures the level and can block the hose so the liquid in it stops tracking the tank. And it hardens over time, so the joints at each end start to weep, which also makes the level read wrong.
Replace it rather than trying to clean a badly scaled or yellowed hose; the material has usually hardened by the time it looks that bad, and a hardened hose will not seal on its fittings again. Fit new clamps with it, do not over-tighten them onto a fresh hose, and check that the liquid in the hose moves freely when the tank is filled.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 6 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the water level hose (part# 47610460) do?
It is the clear sight gauge on the outside of the solution tank. The liquid in the hose sits at the same height as the liquid in the tank, so the operator can see how much solution is left.
Why does a cloudy level hose matter?
Because an operator who cannot see the level either runs the tank dry mid-aisle — scrubbing a dry floor, which cleans badly and wears brushes — or tops up constantly to be safe. Neither gets reported as a fault; the machine just gets used worse.
Can I clean a scaled or yellowed hose instead of replacing it?
Not worth it. By the time it looks that bad the material has usually hardened, and a hardened hose will not seal on its fittings again. Replace it with new clamps and check the liquid moves freely in it when the tank is filled.
How do I order the Water Level Hose (part# 47610460) or get help?
You can add the Water Level Hose (part# 47610460) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the water level hose (part# 47610460) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet