Wheel 5 in. x 1-1/4 in. X8024
$18.99
Genuine OEM 5 in. x 1-1/4 in. wheel (part# X8024) for Tornado and Powr-Flite commercial high-speed burnishers — one of the two wheel sizes used on the Brute Force burnisher chassis. Fits all Tornado Brute Force burnishers (see full list below).
The X8024 is the 5 inch diameter by 1-1/4 inch wide wheel used on the Brute Force burnishers. It appears on every drawing in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings. Note that the drawings also list a smaller 4 inch by 1-1/2 inch wheel (X8935) — the two are not interchangeable, so check the callout before ordering.
Wheels on a burnisher lead a harder life than their size suggests. The machine is heavy, it is tilted back and rolled over thresholds, into and out of vans and elevators, and it is parked on the wheels between jobs. The wheels also sit in whatever is on the floor: stripper, finish, water and grit, all of which attack the tread and work into the bore.
Replace the X8024 when the tread is flat-spotted, chunked or worn down, when the bore has worn oval so the wheel wobbles on the axle, or when the wheel no longer rolls freely. Flat spots are the most common complaint — a machine parked for weeks on one spot takes a set, and a flat-spotted wheel transmits a thump into the handle every revolution. A seized wheel is worse than a worn one: it drags, and it wears the axle instead of itself.
Replace wheels in pairs so the machine sits level, and check the axle at the same time — a worn axle will wreck a new wheel quickly. This wheel is shared across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you are not sure whether your machine takes the 5 inch X8024 or the 4 inch X8935. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.
Compatible Models
- Tornado models:
- P Series 17″ Floor Machine With Pad Holders (115V) — 97562
- 17″ — 97562B
- P Series 17″ Floor Machine With Pad Holders (230V) — 97563
- P Series 20″ Floor Machine With Pad Holders (115V) — 97564
- 20″ — 97564B
- P Series 20″ Floor Machine With Pad Holders (230V) — 97565
- 17″ — 97590
- 20″ 1.5 HP M Series — 97595
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- 17″ 1.5 HP — 98476
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- 20″ 1.5 HP — 98484
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
- Powr-Flite models:
- B171
- B172
- B201
- B202
- C131
- C131G
- C171
- C171HD
- C171HDG
- C171SD
- C172
- C201
- C201HD
- C202
- C202G
- NM1600
- NM171HD
- NM171SD
- NM2000
- NM2000DC
- NM201HD
- NM202
Frequently asked questions
What does the 5 in. x 1-1/4 in. wheel (part# X8024) do on a burnisher?
It is one of the transport wheels the machine rolls and parks on when it is tilted back off the pad.
How do I know if my X8024 wheel needs replacing?
Replace it if the tread is flat-spotted, chunked or worn down, if the bore has worn oval so the wheel wobbles, or if it no longer rolls freely. A thump through the handle on every revolution means a flat spot.
What is the difference between X8024 and X8935?
The X8024 is 5 inches in diameter and 1-1/4 inches wide; the X8935 is 4 inches by 1-1/2 inches. They are different positions on the drawings and are not interchangeable — check the callout.
What models is the 5 in. x 1-1/4 in. wheel (part# X8024) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the 5 in. x 1-1/4 in. wheel (part# X8024) or get help?
You can add the wheel (part# X8024) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet