Dust CompartmentCord Strain ReliefOn-Off SwitchCord Restraining StrapCord Holder Screw M4*15Cord Holder Screw M4*15Cord Holder Screw M4*15Cord Holder Screw M4*15Cord Holder Screw M4*15Cord Holder Screw M4*15Cord Holder Screw M4*15Inner Switch CoverMotor Cover Seal 1Motor Cover Seal 2Dust Compartment Seal Paper Bag 3pkDust CoverDust Cover Latch SpringDust Cover LatchWire Harness CoverSupport StrapMotor CoverExhaust Filter CPU1T MicronExhaust Filter FrameThermal SwitchSwitch ScrewTemperature Wire w/ SwitchTemperature Switch SealGasket – Suction InletDecal – Rear WheelWheel – Rear BlackWasher – Rear WheelE-Clip Ring – Rear WheelTemperature Wire w/ SwitchAxle – Rear WheelScrew – Rear AxleWheel Axle AssemblyScrew – Rear AxleE-Clip Ring – Rear WheelWasher – Rear WheelWheel – Rear BlackWasher – Rear AxleScrew – Hose ClipDecal – Rear WheelWire BushingMotor CordZip TieWire ConnectorScrew – Hose ClipScrew – Hose ClipWarning LabelHose ClipGasket – Suction InletSeal – Suction Inlet SmallBag CollarSuction Inlet AssemblyScrew – Suction InletWasher – Suction InletSpring – Suction InletScrew – Hose ClipScrew – Hose ClipWiring Harness SupportPower Cord 30′ BlackHandle AssemblyFoam GripHandle CapL BoltCord Hook HolderLock WasherNut for L BoltNut for L BoltCord Hook UpperCord Hook SpringLock WasherLock WasherCord Hook LowerScrew – Lower Cord HookHandle FittingScrew – Hose HangerHose HangerScrew – Tool HolderRiccar RHD-1T Body, Handle & Dust Compartment Parts
This is Drawing A of the Riccar RHD-1T (also written RHD1T) parts diagram. It covers the upper half of the vacuum: the dust compartment and dust cover, the on-off switch and thermal switch, the 30′ power cord, the handle assembly, the wheels and the exhaust filter frame. This page lists the Drawing A parts for the Riccar RHD-1T Heavy Duty Commercial Upright, with prices and links.
A vacuum that will not switch on, a cord that has worn through, a dust cover that will not close or a bag compartment that leaks can usually be fixed with a single part. Paper bags and the micron exhaust filter are the parts most owners replace, and each part on this page is sold separately.
Riccar RHD-1T Drawing A Parts List
| Pos # | Image | Part Name | Part No# | Price | View Link |
|---|---|---|---|---|---|
| 1 | Dust Compartment | C622-0500 | Call for price | View Part | |
| 2 | ![]() | Cord Strain Relief | B236-0114 | $3.28 | View Part |
| 3 | ![]() | On-Off Switch | 25.104 | $3.99 | View Part |
| 4 | ![]() | Cord Restraining Strap | B332-0014 | $2.99 | View Part |
| 5 | ![]() | Cord Holder Screw M4*15 | A732-8314 | $2.99 | View Part |
| 6 | ![]() | Inner Switch Cover | 54.131 | $2.74 | View Part |
| 7 | Secondary Filter | 06.147 | Call for price | View Part | |
| 8 | Motor Cover Seal 1 | 54.132 | Call for price | View Part | |
| 9 | Motor Cover Seal 2 | 54.133 | Call for price | View Part | |
| 10 | ![]() | Dust Compartment Seal | 54.134 | $6.99 | View Part |
| 11 | Paper Bag 3pk | 06.153 | Call for price | View Part | |
| 12 | Dust Cover | C622-0300 | Call for price | View Part | |
| 13 | ![]() | Dust Cover Latch Spring | 54.123 | Call for price | View Part |
| 14 | ![]() | Dust Cover Latch | 54.124 | $3.99 | View Part |
| 15 | Inner Switch Cover Seal | 54.128 | Call for price | View Part | |
| 16 | Wire Harness Cover | 54.129 | Call for price | View Part | |
| 17 | Support Strap | 54.13 | Call for price | View Part | |
| 18 | Motor Cover | C622-0700 | Call for price | View Part | |
| 19 | ![]() | Exhaust Filter CPU1T Micron | 06.129 | $3.28 | View Part |
| 20 | Exhaust Filter Frame | 54.126 | Call for price | View Part | |
| 21 | Thermal Switch | 54.049 | Call for price | View Part | |
| 22 | Switch Screw | A732-0700 | Call for price | View Part | |
| 23 | Temperature Wire w/ Switch | C123-0000 | Call for price | View Part | |
| 24 | ![]() | Temperature Switch Seal | B333-0600 | $2.99 | View Part |
| 25 | ![]() | Wheel Axle Assembly | 54.127 | $7.99 | View Part |
| 26 | Decal – Rear Wheel | B210-0414 | Call for price | View Part | |
| 27 | ![]() | Wheel – Rear Black | 54.021 | $4.38 | View Part |
| 28 | Washer – Rear Wheel | 54.024 | Call for price | View Part | |
| 29 | ![]() | E-Clip Ring – Rear Wheel | A732-0300 | $2.99 | View Part |
| 30 | ![]() | Axle – Rear Wheel | 54.135 | $4.99 | View Part |
| 31 | ![]() | Screw – Rear Axle | A732-8500 | $2.99 | View Part |
| 32 | ![]() | Motor Cord | B224-0314B | $4.99 | View Part |
| 33 | Wire Bushing | A732-4114 | Call for price | View Part | |
| 34 | ![]() | Zip Tie | A732-0100 | $2.99 | View Part |
| 35 | ![]() | Wire Connector | B123-0100 | $2.99 | View Part |
| 36 | ![]() | Washer – Rear Axle | 54.136 | $2.99 | View Part |
| 37 | ![]() | Screw – Hose Clip | A732-7705 | Call for price | View Part |
| 38 | Warning Label | – | Not sold separately | ||
| 39 | Hose Clip | 54.137 | Call for price | View Part | |
| 40 | ![]() | Gasket – Suction Inlet | Z19 | $2.99 | View Part |
| 41 | ![]() | Bag Collar | 89.855 | $2.99 | View Part |
| 42 | Seal – Suction Inlet Small | Z12 | Call for price | View Part | |
| 43 | ![]() | Suction Inlet Assembly | C625-0131 | Call for price | View Part |
| 44 | ![]() | Screw – Suction Inlet | A732-1200 | Call for price | View Part |
| 45 | ![]() | Washer – Suction Inlet | B625-0105 | Call for price | View Part |
| 46 | Spring – Suction Inlet | B625-0600 | Call for price | View Part | |
| 47 | Wiring Harness Support | B333-0213 | Call for price | View Part | |
| 48 | Power Cord 30' Black | 14.040 | Call for price | View Part | |
| 49 | Handle Assembly | 18.145 | Call for price | View Part | |
| 50 | Foam Grip | 54.031 | Call for price | View Part | |
| 51 | Handle Cap | G10 | Call for price | View Part | |
| 52 | ![]() | L Bolt | A732-4200 | $3.28 | View Part |
| 53 | Cord Hook Holder | 54.032 | Call for price | View Part | |
| 54 | ![]() | Lock Washer | A732-3900 | $3.28 | View Part |
| 55 | ![]() | Nut for L Bolt | A732-4300 | $3.28 | View Part |
| 56 | Cord Hook Upper | 54.019 | Call for price | View Part | |
| 57 | ![]() | Cord Hook Spring | B430-0200 | $2.99 | View Part |
| 58 | ![]() | Cord Hook Washer | A430-0405 | $2.99 | View Part |
| 59 | ![]() | Cord Hook Lower | 54.018 | $4.38 | View Part |
| 60 | ![]() | Screw – Lower Cord Hook | A732-5000 | $3.28 | View Part |
| 61 | Handle Fitting | B324-0400 | Call for price | View Part | |
| 62 | ![]() | Screw – Hose Hanger | A232-0100 | $2.99 | View Part |
| 63 | ![]() | Hose Hanger | 54.140 | $8.99 | View Part |
| 64 | On Board Tool Holder | 54.139 | Call for price | View Part | |
| 65 | ![]() | Screw – Tool Holder | A430-0900 | $2.99 | View Part |
How to use this parts list
Use the Pos # column to match a part to the numbered callout in the parts diagram, then use View Part to open the product page for that part number.
Dust compartment and dust cover parts
The dust compartment holds the paper bag, and the dust cover closes it. If the cover does not close properly or the compartment leaks dust, check the dust cover and the dust compartment parts in the table above. The paper bag (3-pack) is the most common replacement.
Handle, power cord and wheels
The handle assembly, the 30′ black power cord and the wheels are all part of Drawing A. A worn cord or a loose handle can be replaced on its own, without buying a new vacuum.
Switches and exhaust filter
The on-off switch and the thermal switch are listed in this drawing, along with the exhaust filter frame. The micron exhaust filter (CPU1T) is a regular replacement item.
Looking for nozzle, brushroll or belt parts?
The nozzle housing, bottom plate, agitator brushroll, nylon brush strips, belt, headlight components and on-board tools are in Drawing B. See Riccar RHD-1T Nozzle Housing, Brushroll & Bottom Plate Parts.
Frequently asked questions
What is in Drawing A of the Riccar RHD-1T parts diagram?
Drawing A covers the main body, the handle and the dust compartment. That includes the dust compartment and dust cover, the on-off switch, the thermal switch, the 30′ power cord, the handle assembly, the wheels and the exhaust filter frame.
What should I check if my Riccar RHD-1T will not turn on?
Look at the on-off switch, the thermal switch and the power cord. All three are listed in the table above and are sold separately.
What bags and filter does the Riccar RHD-1T use?
The RHD-1T uses standard paper vacuum bags (3-pack) and a micron exhaust filter. Both are listed in this drawing.
Where are the belt and brush strips for the RHD-1T?
They are in Drawing B, not here. Use the Drawing B link above to see the belt, brushroll and nylon brush strips.
Can I replace the power cord on my own?
The 30′ black power cord is sold as a separate part, so you can replace just the cord. If you are not comfortable doing the repair yourself, call us and our service center can help.
Need help finding the right part? Call Twin City Vacuum at 763-535-0770 or visit us at 5415 W Broadway, Crystal, MN. Have your vacuum’s model number ready.



































