Screw – Hose Inlet TubeHose Inlet TubeNozzle HousingNozzle Hose CuffNozzle Attachment HoseNozzle Housing Pivot BushingLens ClipLens ClipHeadlight LensName PlateHeadlight ShieldFurniture Guard BlackHeadlight SocketHeadlight Bulb 15wScrew – Headlight ShieldScrew – Headlight ShieldBottom Plate AssemblyBottom Plate GasketWheel Pin – Bottom PlateWheel – Bottom Plate 24.5mmPush on Spring NutBottom Plate (sold as an assembly, see Pos 15)Push on Spring NutWheel – Bottom Plate 24.5mmFelt Packing TopVented Support Fitting BottomBelt BulkPedal FrameBelt GuardScrew – Pedal FramePedal SpringBelt Cover RearPedal ShaftE Clip – 4MMFoot Pedal – BlackMotor Mount Rear (Not sold separately)Motor AssemblyTemperature Wire – Not sold separatelyTemperature Wire – Not sold separatelyMotor Mount FrontPivot Sleeve – MetalSound Suppressor – FoamBrushroll AssemblyEnd Cap – Rubber Cover LeftEnd Cap – LeftFelt CoverAgitator BearingBearing HolderBrush Strip Nylon 10.3MMAgitator PulleyBrush Strip Nylon 10.3MMAgitator Core (only sold complete)Agitator ShaftE Clip – 4MMSpring ClipScrew – Bottom PlateUpholstery BrushWand 2pcCrevice ToolScrew – Pedal FrameRiccar RHD-1T Nozzle Housing, Brushroll & Bottom Plate Parts
This is Drawing B of the Riccar RHD-1T (also written RHD1T) parts book. It covers the lower half of the vacuum, where it meets the floor: the nozzle housing, the bottom plate assembly, the headlight components, the agitator brushroll core and nylon brush strips, the belt and the on-board tools (wand, crevice tool and upholstery brush). This page lists the Drawing B parts for the Riccar RHD-1T Heavy Duty Commercial Upright, with prices and links.
Worn brush strips, a stretched or broken belt and a cracked bottom plate are the most common reasons the RHD-1T stops cleaning well, and each can usually be fixed with a single part. Every part on this page is sold separately.
Riccar RHD-1T Drawing B Parts List
| Pos # | Image | Part Name | Part No# | Price | View Link |
|---|---|---|---|---|---|
| 1 | ![]() | Screw – Hose Inlet Tube | A732-2500 | $2.99 | View Part |
| 2 | Hose Inlet Tube | Z06R | Call for price | View Part | |
| 3 | Nozzle Housing | C622-0100 | Call for price | View Part | |
| 4 | Nozzle Hose Cuff | 54.17 | Call for price | View Part | |
| 5 | Nozzle Attachment Hose | 54.143 | Call for price | View Part | |
| 6 | Nozzle Housing Pivot Bushing | 84.2 | Call for price | View Part | |
| 7 | Lens Clip | 54.145 | Call for price | View Part | |
| 8 | ![]() | Headlight Lens | N19-CL | $3.99 | View Part |
| 9 | Name Plate | – | Not sold separately | ||
| 10 | Headlight Shield | A28 | Call for price | View Part | |
| 11 | ![]() | Furniture Guard Black | A03 | $10.99 | View Part |
| 12 | Headlight Socket | B018-1000 | Call for price | View Part | |
| 13 | ![]() | Headlight Bulb 15w | A018-0600 | $3.28 | View Part |
| 14 | ![]() | Screw – Headlight Shield | A732-5300 | $2.99 | View Part |
| 15 | Bottom Plate Assembly | 54.006 | Call for price | View Part | |
| 16 | Bottom Plate Gasket | B021-0200 | Call for price | View Part | |
| 17 | ![]() | Wheel Pin – Bottom Plate | B010-0500 | $2.99 | View Part |
| 18 | Wheel – Bottom Plate 24.5mm | B010-1014 | Call for price | View Part | |
| 19 | Push on Spring Nut | A732-2100 | $3.28 | View Part | |
| 20 | Bottom Plate (sold as an assembly, see Pos 15) | – | Not sold separately | ||
| 21 | ![]() | Screw – Bottom Plate | A732-2000 | $2.99 | View Part |
| 22 | ![]() | Felt Packing Top | A09 | $4.99 | View Part |
| 23 | ![]() | Vented Support Fitting Bottom | B017-1200 | $2.99 | View Part |
| 24 | Belt Bulk | 09.104 | Call for price | View Part | |
| 25 | Pedal Frame | 54.147 | Call for price | View Part | |
| 26 | ![]() | Belt Guard | B014-0500 | $3.28 | View Part |
| 27 | ![]() | Screw – Pedal Frame | A732-8314 | $2.99 | View Part |
| 28 | ![]() | Pedal Spring | B020-0400 | $2.99 | View Part |
| 29 | Belt Cover Rear | 54.041 | Call for price | View Part | |
| 30 | ![]() | Pedal Shaft | B020-0300 | $2.99 | View Part |
| 31 | ![]() | E Clip – 4MM | A732-0200 | $2.99 | View Part |
| 32 | ![]() | Foot Pedal – Black | 54.016 | $4.38 | View Part |
| 33 | Motor Mount Rear | – | Not sold separately | ||
| 34 | Motor Assembly | D200-2500 | Call for price | View Part | |
| 35 | Temperature Wire | – | Not sold separately | ||
| 36 | Motor Mount Front | B123-4100 | $3.28 | View Part | |
| 37 | ![]() | Pivot Sleeve – Metal | B123-1300 | $3.99 | View Part |
| 38 | ![]() | Sound Suppressor – Foam | B123-1900 | $2.99 | View Part |
| 39 | ![]() | Brushroll Assembly | D012-2500 | $57.99 | View Part |
| 40 | ![]() | End Cap – Rubber Cover Left | B012-0214 | $2.99 | View Part |
| 41 | ![]() | End Cap – Left | B012-0700 | $2.99 | View Part |
| 42 | ![]() | Felt Cover | B012-0600 | $2.99 | View Part |
| 43 | Agitator Bearing | 08.008 | Call for price | View Part | |
| 44 | Bearing Holder | B08S | Call for price | View Part | |
| 45 | Brush Strip Nylon 10.3MM | 10.133 | Call for price | View Part | |
| 46 | Agitator Pulley | B07S | Call for price | View Part | |
| 47 | ![]() | Spacing Spring | B624-0100 | $2.99 | View Part |
| 48 | ![]() | End Cap – Right Pulley Side | B012-0800 | $2.99 | View Part |
| 49 | ![]() | End Cap Rubber Cover – Right | B012-0114 | $2.99 | View Part |
| 50 | Agitator Core (only sold complete) | B012-0300 | Call for price | View Part | |
| 51 | ![]() | Agitator Shaft | B012-1000 | $3.99 | View Part |
| 52 | Spring Clip | B012-0400 | Call for price | View Part | |
| 53 | Wand 2pc | 54.151 | Call for price | View Part | |
| 54 | Crevice Tool | 54.153 | Call for price | View Part | |
| 55 | Upholstery Brush | 54.152 | Call for price | View Part |
How to use this parts list
Use the Pos # column to match a part to the numbered callout in the parts diagram, then use View Part to open the product page for that part number.
Brushroll, brush strips and belt
The agitator brushroll core, the nylon brush strips and the belt are listed in this drawing. The brush strips and the belt are wear items, so they are the parts most owners replace first. If the brushroll is not spinning or the vacuum is leaving dirt behind, start with these.
Nozzle housing and bottom plate
The nozzle housing and the bottom plate assembly make up the base of the vacuum around the brushroll. If either is cracked or damaged, check the table above for the part you need.
Headlight and on-board tools
The headlight components and the on-board tools (wand, crevice tool and upholstery brush) are also part of Drawing B.
Looking for bag, filter, cord or handle parts?
The dust compartment, dust cover, on-off switch, thermal switch, power cord, handle assembly, wheels and exhaust filter frame are in Drawing A. See Riccar RHD-1T Body, Handle & Dust Compartment Parts.
Frequently asked questions
What is in Drawing B of the Riccar RHD-1T parts book?
Drawing B covers the nozzle housing, the bottom plate assembly, the headlight components, the agitator brushroll core and nylon brush strips, the belt and the on-board tools.
What should I check if my Riccar RHD-1T is not cleaning well?
Look at the nylon brush strips and the belt first. Both are listed in the table above and are sold separately, so you can replace only the part that has worn out.
Can I replace the brush strips without buying a new brushroll?
Yes. The brushroll core and the nylon brush strips are listed as separate parts, so you can replace just the strips.
Where are the bags, filter and power cord for the RHD-1T?
They are in Drawing A, not here. Use the Drawing A link above to see the paper bags, exhaust filter and power cord.
Which on-board tools does the RHD-1T have?
The RHD-1T has a wand, a crevice tool and an upholstery brush, all listed in this drawing.
Need help finding the right part? Call Twin City Vacuum at 763-535-0770 or visit us at 5415 W Broadway, Crystal, MN. Have your vacuum’s model number ready.

























