Cleanmax Model CMPS-QDZ Main Body Front Parts

CleanMax CMPS-QDZ sections: Nozzle & Motor  |  Main Body Front  |  Main Body Back  |  Agitator  |  All CMPS-QDZ Parts

Find genuine CleanMax CMPS-QDZ main body front replacement parts for Model CMPS-QDZ. Can’t find your part? Call us at 763-535-0770.

Click on any numbered part in the diagram below to go directly to that part’s product page.

About the CleanMax CMPS-QDZ Main Body Front Parts

Find genuine CleanMax CMPS-QDZ main body front replacement parts for Model CMPS-QDZ. This is the front of the machine body, where filtration, controls and cord management live: the dust compartment and its latching cover, the on/off switch and cover, the secondary and HEPA exhaust filters, the CMP-12 paper and CMH-6 HEPA bags, the motor cover and thermal reset switch, the Hall-sensor board and harness, the 50-foot power cord and pigtail, and the Quick Draw wand, holders and clean-out. Twin City Vacuum has been selling and servicing CleanMax equipment since 1956. All parts are sourced directly from Tacony. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.

#	Image	Part Description	Part Number	Link
1		Dust Compartment	CM021020	View Part
2		On/Off Switch	25.104	View Part
3		Retaining Strap	B332-0014	View Part
4		Screw	A732-8314	View Part
5		Switch Cover	54.131	View Part
6		Secondary Filter	CMPS-SF	View Part
7		Seal Kit	Not Available	View Part
8		Dust Compartment Seal	54.134	View Part
9		Paper Bag 12pk (CMP-12) / HEPA Bag 6pk (CMH-6)	CMP-12 / CMH-6	View Part
10		Dust Cover Assembly w/Latch	CM-A0101	View Part
11		Latch Spring	54.123	View Part
12		Dust Cover Latch	54.124	View Part
13		Switch Cover Seal	Not Available	View Part
14		Motor Cover	CM021005	View Part
15		Combination Screw	A732-5300	View Part
16		Ground Screw	A732-4500	View Part
17		Housing Screw	A732-7500	View Part
18		Thermal Reset Switch	B333-0400B	View Part
19		Thermal Switch Seal	B333-0600	View Part
20		Motor Lead Cord	B224-3014B	View Part
21		Wire Bushing	A732-4114
22		Zip Tie	A732-0100	View Part
23		Wire Connector	B123-0100	View Part
24		Handle Retainer	CM021009
25		Power Cord 50 ft	CMPS-50C	View Part
26		HEPA Exhaust Final Filter	CMPS-HEPA	View Part
27		Quick Draw Wand	B434-5400B	View Part
28		Cord Restraint	B352-6900	View Part
29		Quick Draw Attachment Holder	CMQD-WNDHLD	View Part
30		Quick Draw Clean Out Port	CMQD-CO	View Part
31		30 ft Extension Cord	CMPS-EXT30	View Part
32		Lead Cord Pigtail	CM011458	View Part
33		Strain Relief	39303	View Part
34		Hall Sensor Board Kit	B228-0120K	View Part
35		Hall Sensor Wire Harness	B228-0200	View Part

Frequently Asked Questions

What parts are in the CleanMax CMPS-QDZ main body front section?

This section covers the dust compartment and controls: the bag chamber and dust cover, the on/off switch and cover, the secondary and HEPA exhaust filters, the paper and HEPA bags, the motor cover, thermal switch, Hall-sensor electronics, the power cord and cord management, and the Quick Draw wand and holders — all numbered in the diagram above.

Which bags and filters does the CMPS-QDZ use?

It takes CMP-12 high-filtration paper bags or CMH-6 cloth HEPA bags, plus the CMPS-SF secondary filter and the CMPS-HEPA exhaust final filter. All are listed in the table so you can restock the right consumables.

Why won’t my CMPS-QDZ turn on?

Check the on/off switch (25.104), the power cord (CMPS-50C) and lead cord pigtail (CM011458), and the thermal reset switch (B333-0400B), which cuts power if the motor overheats. Each part page explains its symptoms.

How do I order CMPS-QDZ main body front parts or get help?

Click any part in the table to open its product page and add it to your cart, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part.

Looking for parts from another section? Return to the CleanMax CMPS-QDZ parts overview to browse all assemblies, or call us at 763-535-0770.