CleanMax CMP-3QD Nozzle Assembly Parts

Find genuine CleanMax CMP-3QD nozzle parts for Model CMP-3QD. Can’t find your part? Call us at 763-535-0770.

Use the numbered callouts on the diagram below to match each part in the table, then click View Part to go to that part’s product page.

Click on any numbered part in the diagram below to go directly to that part’s product page.

CleanMax Pro-Series Nozzle Assembly parts diagram

CleanMax CMP-3QD Nozzle Parts

These genuine CleanMax CMP-3QD nozzle parts are Tacony OEM components. Find genuine CleanMax CMP-3QD nozzle assembly replacement parts for Model CMP-3QD. In addition to the shared nozzle housing, furniture guard, belt, baseplate and support hardware, the quick-clean-out CMP-3QD nozzle adds the quick draw nozzle hose (CMQD-NOZHOSE) and the metal agitator assembly (D012-2500). Twin City Vacuum has been selling and servicing CleanMax equipment since 1956, and every part is sourced directly from Tacony. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.

#ImagePart DescriptionPart NumberPrice
1Image coming soonFront nozzle shell with clear furniture guardC625-0108$62.99
2Hose Inlet Tube ScrewM4 x 12 service screwA732-2500$2.99
5WasherSpacer washer in the nozzle assemblyA430-0405$2.99
6Screw #8-18 x 5/8Hi-Lo service screwA732-8314$2.99
7Furniture Guard ClearClear furniture bumper stripB625-0108$11.99
8Furniture Guard RivetRivet securing the furniture guardBA00943000$3.99
9Image coming soonWasher for the furniture guard rivet004300032
10Pedal FrameFrame carrying the foot pedal mechanismB020-0200$3.99
11Swivel Belt CoverCover enclosing the brushroll beltCM011006$5.99
12Swivel Belt Cover SpringSpring tensioning the belt coverCM031005$2.99
13Swivel Belt Cover ScrewScrew fastening the belt coverCM031004$2.99
14Felt PackingFelt seal around the brushroll endA09$4.99
15Vented Support FittingBrushroll end support with ventingB017-1200$2.99
16Brushroll BeltDrive belt from motor to agitatorB014-0714$4.99
17Baseplate StudStud anchoring the nozzle baseplateCM011012$2.99
18Baseplate AssemblyUnderside nozzle baseplate assemblyCM011007$32.99
19Baseplate SealGasket sealing the baseplateCM031001$0.99
20Baseplate WheelSmall nozzle baseplate wheelB010-1913$2.99
21Baseplate Wheel AxleAxle carrying the baseplate wheelsB010-0500$2.99
22Image coming soonLeft catch locking the baseplateCM011008Incl. w/ CM011007
23Image coming soonRight catch locking the baseplateCM011009Incl. w/ CM011007
25Quick Draw Nozzle HoseQuick-draw nozzle suction hoseCMQD-NOZHOSE$7.99
26Handle Release Spring ScrewScrew securing the handle release springCM031000$1.99
27Handle Release SpringReturn spring for the handle release53.088B$2.99
28Metal Agitator AssemblyComplete metal brushroll (3QD)D012-2500$57.99

Frequently Asked Questions

What parts are in the CleanMax CMP-3QD nozzle assembly?

This section covers the CMP-3QD nozzle: the nozzle housing and furniture guard, brushroll belt and swivel belt cover, felt packing and support fitting, baseplate assembly with wheels, axle and latches, quick draw nozzle hose (CMQD-NOZHOSE), handle release spring, and the metal agitator assembly (D012-2500).

Which agitator does the CMP-3QD use?

The CMP-3QD uses the metal agitator assembly D012-2500, not the plastic C625-0100 used on the CMP-3N and CMP-3T.

How do I find the right CleanMax CMP-3QD nozzle part?

Match the numbered callout on the diagram above to the same number in the table, then click View Part, or call us at 763-535-0770 for help.

Questions about fitment? Call Twin City Vacuum at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428 — serving CleanMax owners since 1956.