Find genuine CleanMax CMP-3T main body front replacement parts for Model CMP-3T. Can’t find your part? Call us at 763-535-0770.
Use the numbered callouts on the diagram below to match each part in the table, then click View Part to go to that part’s product page.
About the CleanMax CMP-3T Main Body Front Parts
Find genuine CleanMax CMP-3T main body front replacement parts for Model CMP-3T. Along with the shared cords, wiring, thermal switches, filters, dust cover, switch and wheel hardware, the CMP-3T front body carries the motor cover seal kit, motor cover and dust cover assembly used on the tools-on-board configuration. Twin City Vacuum has been selling and servicing CleanMax equipment since 1956, and every part is sourced directly from Tacony. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
| # | Image | Part Description | Part Number | Link |
|---|---|---|---|---|
| 1 |  | Internal power lead from the cord to the switch and motor | CM011458 | View Part |
| 2 |  | Bushing that anchors the power cord at the body entry | X1102 | View Part |
| 3 |  | Machine screw used on the main body | A732-7705 | View Part |
| 4 | Image coming soon | Shroud that shields the internal wiring harness | 54.129 | View Part |
| 5 |  | Internal lead that powers the motor | B224-0314B | View Part |
| 6 | Image coming soon | Grommet protecting wiring at a pass-through | A732-4114 | View Part |
| 7 |  | Hi-Lo service screw used at many points | A732-8314 | View Part |
| 8 |  | Gasket for the motor thermal cut-out | B333-0600 | View Part |
| 9 |  | Manual-reset motor overheat switch | B333-0400B | View Part |
| 10 |  | Pivot sleeve bushing in the motor compartment | B017-0214 | View Part |
| 11 |  | Pre-motor filter protecting the motor | CMPS-SF | View Part |
| 12 | Image coming soon | Gaskets that seal the motor cover airway | C609-5000 | View Part |
| 13 | Image coming soon | Black cover enclosing the motor compartment | B625-0109 | View Part |
| 14 |  | Final post-motor HEPA exhaust filter | CMPS-HEPA | View Part |
| 15 |  | Spring that keeps the dust cover latched | 54.123 | View Part |
| 16 |  | Combined dust cover latch with spring | B625-0107 | View Part |
| 17 |  | Outer black bag-compartment door | C625-0107 | View Part |
| 18 |  | Standard paper vacuum bags, 12 per pack | CMP-12 | View Part |
| 19 |  | Gasket sealing the dust cover to the compartment | 54.134 | View Part |
| 20 | Image coming soon | Gasket for the on/off switch cover | 54.128 | View Part |
| 21 |  | Cover housing the on/off switch | 54.131 | View Part |
| 22 |  | Cable clamp securing internal cabling | B332-0014 | View Part |
| 23 |  | Fitting that secures the handle to the body | B431-1700 | View Part |
| 24 |  | Rocker switch that powers the motor | 25.104 | View Part |
| 25 |  | Rear wheel and axle assembly | 54.127 | View Part |
| 26 |  | 59mm rubber rear wheel | B210-0531 | View Part |
| 27 |  | 25mm nylon washer at the axle/body hardware | A732-6500 | View Part |
| 28 |  | 5mm E-clip retaining axles and shafts | A732-0300 | View Part |
| 29 |  | Steel axle carrying the rear wheels | 54.135 | View Part |
| 30 |  | Clamp securing the rear wheel axle | 54.136 | View Part |
| 31 |  | Flat-head screw for the axle clamp | A732-8500 | View Part |
| 33 |  | 30-foot replacement power cord | CMPS-EXT30 | View Part |
| 32 |  | Dust compartment housing with valve | C625-0106 | View Part |
Frequently Asked Questions
What parts are in the CleanMax CMP-3T main body front section?
This section covers the front of the CMP-3T body, including the cords and strain relief, wiring and motor leads, thermal switch and reset, secondary and HEPA filters, motor cover and seal kit, dust cover assembly and latch, dust compartment assembly, on/off switch, and the rear wheels, axle and clamp hardware.
How do I find the right CleanMax CMP-3T part?
Match the numbered callout on the diagram above to the same number in the table, then click View Part. If you are unsure, call us at 763-535-0770 and we will confirm the correct part number.
Are these genuine Tacony parts?
Yes. Every part listed for the CleanMax CMP-3T is a genuine Tacony (OEM) component, sourced directly from the manufacturer.
Questions about fitment? Call Twin City Vacuum at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428 — serving CleanMax owners since 1956.