Find genuine Mytee 1000DX-200 Speedster and 2005CS Contractor’s Special base, pump and power inlet parts. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
36. 48 in Solution Hose – AH20615. 10-32 x 1/2 in Pan Head Screw – H23017. Connecting Plate – H31214. 10-32 Kep Nut – H27323. Solution Hose 1/2 in Polywire Reinforced – PH615K21. 1/2 in Barb x 3/8 in MPT 90 Degree Brass Elbow – B17220. 220 PSI Diaphragm Pump – C322D6. 1/4 in Stainless Flat Washer – H21019. 10-32 x 1-1/4 in Pan Head Screw – H22218. 3/8 in MPT x 1/4 in FPT Brass 90 Degree Elbow – B21212. 10 in Foam-Filled Wheel – H39213. 12mm External C-Clip – H0429. Speedster Base – P74711. Washer 11/16 in ID x 1-1/2 in OD, Stainless – H29910. Rear Wheel Axle – H3718. 4 in Locking Swivel Caster – H6687. Bolt 1/4-20 x 1 in Hex Head, Stainless – H3426. 1/4 in Stainless Flat Washer – H2105. Lock Nut 1/4-20, Nylon Insert, Stainless – H2161. Screw 10-32 x 3/4 in Phillips Flat Head, Black Stainless – H1865. Lock Nut 1/4-20, Nylon Insert, Stainless – H2163. Vacuum Shut-Off Float Switch Relay – E6324. Lock Nut 6-32, Nylon Insert – H7922. Relay Switch Mounting Plate – H63222. 5/16 to 29/32 in Hose Clamp – H34716. 20 Amp Flanged Twist-Lock Inlet – E36014. 10-32 Kep Nut – H27315. 10-32 x 1/2 in Pan Head Screw – H230This drawing covers the base of the Mytee 1000DX-200 Speedster. The 2005CS Contractor’s Special is the same machine as the 1000DX-200 sold as a package, so this drawing covers both.
Mytee 1000DX-200 pump parts on this drawing
The base carries the 10-inch wheels on the H371 axle and the 4-inch casters. Inside it sit the C322D 220 PSI diaphragm pump, the relay on its mounting plate, and the E360 twist-lock inlet where the detachable cord plugs in.
In addition, the drawing shows the brass bushing and elbow on the pump and the hoses that leave it. For example, if the wand sprays weakly, start with the tank strainer and the quick disconnect, then the pump.
However, parts marked Call are fasteners, the base and hose lengths that Mytee does not sell on its website, so call us and we will order them.
Mytee 1000DX-200 / 2005CS Base, Pump & Power Inlet Parts List
Frequently Asked Questions
Which pump does the 1000DX-200 and 2005CS use?
The C322D 220 PSI diaphragm pump, item 20 on this drawing.
Where does the power cord plug in?
Into the E360 twist-lock inlet, item 16. The detachable E351A cord is sold separately.
Why do some parts say Call?
Mytee does not sell every fastener, fitting and length of hose on its website. Call 763-535-0770 with the item number from this drawing and we will order it.
How do I order 1000DX-200 or 2005CS pump and base parts?
Click the part on the drawing or in the table and add it to your cart, or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part first.
Need other parts? See the solution tank, handle and plumbing or the vacuum tank, motors and switches, or go back to all Mytee 1000DX-200 and 2005CS parts diagrams. You can also see the 1000DX-200 and 2005CS on mytee.com.
















