Find genuine Mytee 80-120 chemical dispenser parts and housing parts for the Prep Center S. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
17. 1/4 in Female Pneumatic Quick Disconnect – B19019. 1/4 in Female Quick Disconnect, FPT – B10218. Cuties QD Safety Covers, Pack of 2 – P59020. Rocker Switch, 2 Position – E51523. Screw #10 x 5/8 in Phillips Pan Head, Stainless – H67724. Prep Center Switch Plate – H45425. 10-32 Kep Nut – H27321. Screw 10-32 x 1/2 in Socket Head – H38922. Flat Washer #10, Stainless – H28915. 1/4 in MPT x 1/4 in Push-In Brass Connector – B16610. Chemical Dispenser Tool – PC1215. 1/4 in MPT x 1/4 in Push-In Brass Connector – B16628. Nylon Tubing 1/4 in, Black – PH657-2129. Nylon Tubing 1/4 in, Black – PH657-1430. 1/4 in Push-In Brass Tee – B1788. 10-32 x 1/2 in Pan Head Screw – H23032. Connecting Plate – H31226. Nylon Tubing 1/4 in, Black – PH657-6033. Blue Housing, Prep Center – P65114. Coiled Solution Hose, Black – PC-0713. 3/8 in Push-In Fitting – B20112. Nylon Tubing 1/4 in, Black – PH657-1211. 2.5 in Tethered Cap – G0369. 3 Quart Chemical Bottle – PC138. 10-32 x 1/2 in Pan Head Screw – H2307. Bottle Strap, Prep Center – H6266. Front Hinge Bracket – H3782. 1/4 in Stainless Flat Washer – H2105. Lock Washer 1/4 in, Stainless – H2134. Bolt 1/4-20 x 3/4 in Hex Head, Stainless – H2021. Lock Nut 1/4-20 Nylon Insert, Stainless – H2162. 1/4 in Stainless Flat Washer – H2103. Bolt 1/4-20 x 1-1/2 in Hex Head, Stainless – H3168. 10-32 x 1/2 in Pan Head Screw – H23034. Injection Sprayer Wire Hanger – H54731. Dispenser Tool Jet – PC12A27. Nylon Tubing 1/4 in, Black – PH657-516. Flat Washer 1/2 in – H87616. Flat Washer 1/2 in – H876This page covers the upper section of the 80-120 Prep Center S: the blue housing, the switch plate and rocker switches, and the shop-air chemical dispensing system. That system is three 3-quart bottles with their caps and strap, three coiled hoses with dispenser guns and replaceable jets, the nylon tubing and push-in tees that connect them, and the brass air fittings and quick disconnect. The front quick disconnect and its Cuties cover are here too. Mytee does not sell the housing, coiled hoses, tubing or stainless hardware on its website; those rows say Call. Twin City Vacuum has been selling and servicing cleaning equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Mytee 80-120 Housing & Chemical Dispenser Parts List
Frequently Asked Questions
What Mytee 80-120 chemical dispenser parts are on this diagram?
The three PC13 bottles with G036 caps, the PC12 dispenser guns and PC12A jets, the coiled hoses, the nylon tubing with B178 push-in tees and B201 and B166 push-in fittings, and the B190 air quick disconnect.
My 80-120 dispenser gun sprays poorly. What should I replace?
Try a new PC12A jet first. If the gun still leaks or will not shut off, replace the PC12 gun. Also check that the air pressure is at or below Mytee’s 30 PSI maximum.
What powers the 80-120 chemical dispenser?
Shop air, regulated by the H968 regulator; Mytee rates the dispenser system at 30 PSI maximum.
How do I order a part marked Call?
Call 763-535-0770 with the part number from the list and we will order it for you.
Need another area of the machine? Go back to the Mytee 80-120 Prep Center S parts diagrams, browse parts for every Mytee machine, or see Mytee’s own 80-120 Prep Center S page.

















