Find genuine Mytee Carpet Shark CRB3010 parts for the 10 in counter-rotating brush machine. Can’t find your part? Call us at 763-535-0770.
This drawing is tall, so it is shown at 700 pixels wide on this page; the clickable dots are placed and checked at that width.
Click on any numbered part in the diagram below to go directly to that part’s product page.
5. Screw, 8-32 x 3/8 in Socket Head Cap, Alloy, Black – H2466. Trough Clip, CRB – H9547. Cover, Front, 10 in, CRB3000 – H9698. Carpet Shark Hex Bearing Bushing – P5369. Side Plate, Right, CRB – H93910. Carpet Shark Side Cover – P54911. Carpet Shark CRB3010 10 in Crossbar Support – H94714. Carpet Shark Snap Action Switch – E41420. Carpet Shark Handle Pivot Adapter – H95123. Carpet Shark 5-Piece Upper Handle Set – H95224. Carpet Shark Handle Pivot Release Adapter – H94927. Carpet Shark 42 in Power Cord Pigtail – E53429. Top Cover, Rear, CRB3010 – H94511. Carpet Shark CRB3010 10 in Crossbar Support – H94740. C-clip, 3/8 in, External – H33241. Lockout, Handle Release, CRB – H94842. Carpet Shark Flange Bushing – P55143. #10 Flat Washer, Stainless – H28944. 10-32 x 1/2 in Pan Head Screw – H23047. Carpet Shark CRB3010 10 in Brush Shaft – H93710. Carpet Shark Side Cover – P54952. Screw 10-32 x 1/2 in Flat Head Socket Cap, Stainless – H01855. Carpet Shark 39 Tooth Brush Pulley – H93845. Carpet Shark Left Side Plate – H94157. Carpet Shark Bearing Cover Plate – H94628. Screw, 8-32 x 3/8 in, Phillips Pan, Stainless – H64760. Carpet Shark CRB3010 10 in White Brush – H96561. Chassis, Motor, CRB3010 – H93628. Screw, 8-32 x 3/8 in, Phillips Pan, Stainless – H64726. Cord Strain Relief Fitting – H22025. Lock Nut 1/2 in, Steel, Electrical – H22153. Carpet Shark Magnet Block – H62249. Tensioner, CRB – H51250. Bearing, 6001RS, Stainless, CRB – H43554. Carpet Shark 76 Tooth Drive Belt – H971A48. Lockout Spring – H16817. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H25619. Screw, Binding Barrel, 1/4-20 x 1 in, Stainless CRB – H96031. Carpet Shark Geared Brush Motor – C35432. Motor Mount, CRB3010 – H683A33. Screw 1/4-20 x 3/4 in Button Head, Black Oxide – H04734. Carpet Shark 20 Tooth Drive Pulley – H970A35. Screw, 5/16-24 x 3/4 in, Allen, Flat, Counter Sunk, Stainless – H04337. Shim, 1-3/8 in x 1-1/4 in, CRS – H28638. 1/4 in Lock Washer, Stainless – H21339. Bolt 1/4-20 x 3/4 in Hex Head, Stainless – H2026. Trough Clip, CRB – H95430. 10-32 Kep Nut – H27315. Nut, Lock, 6-32, Nylon Insert – H79216. 10 Amp Circuit Breaker – E58318. Bridge Rectifier – E39722. Cord Hook, CRB – P60321. Carpet Shark CRB3010 Handle Base – H95656. Carpet Shark 5/8 in Internal Retaining Ring – H32912. Screw, 6-32 x 1 in, Phillips Pan Head, Stainless – H56813. Screw, 6-32 x 1/2 in Phillips Pan Head, Stainless – H35633. Screw 1/4-20 x 3/4 in Button Head, Black Oxide – H0474. Nut, Lock, 8-32, Nylon Insert – H1463. Carpet Shark CRB3010 10 in Transport Tray – P56459. Screw, #6 x 1/2 in, Phillips, Flat Head, Stainless – H62458. Carpet Shark Magnet Catcher Plate – H5661. Bumper with Washer – G0872. Screw #8 x 5/8 in Phillips Oval, Stainless – H30436. 1/4 in Stainless Flat Washer – H21038. 1/4 in Lock Washer, Stainless – H21339. Bolt 1/4-20 x 3/4 in Hex Head, Stainless – H20262. Carpet Shark Brush Bearing with Housing – H962The Mytee Carpet Shark CRB3010 parts book has a single drawing of the whole machine: the chassis, side plates and covers, the two C354 geared brush motors with their 20 tooth and 39 tooth pulleys and 76 tooth belts, the H965 10 in white brushes and shafts with their H962 bearings, the magnet catcher plates and H622 magnets, the E414 switch and E397 rectifier, the handle set with its pivot and release, the E534 power cord pigtail and the transport tray. Items 46 and 51 are listed in the parts book but have no readable callout on the drawing, so they are added at the end of the table.
Mytee Carpet Shark CRB3010 Parts List
Frequently Asked Questions
What drives the Carpet Shark brushes?
Two C354 geared motors, each driving a brush through a 76 tooth H971A belt.
What brushes does the CRB3010 use?
Two H965 10 in white brushes.
Which parts are only sold by phone?
Rows marked Call are parts Mytee does not sell online, such as screws, nuts and some covers. Call 763-535-0770.
For an overview of this machine, accessories and common questions, see the Mytee Carpet Shark CRB3010 parts hub.































