Brass Nipple 1/4″ MPT PX32
$4.99
Genuine Tacony OEM 1/4 inch male pipe thread brass nipple (part# PX32) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. Connects two female ports on the pressurised solution side.
The Brass Nipple 1/4″ MPT (part# PX32) is a genuine Tacony OEM replacement part from the chassis assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the brass nipple that joins two 1/4 inch female pipe threaded components.
What the Brass Nipple 1/4″ MPT does
Brass is the material of choice here because pipe threads seal by deforming slightly as they are drawn together, and brass does that consistently without seizing or corroding into place the way steel does in a wet chemical environment. That also means a brass nipple can be removed years later during a service instead of shearing off in the port.
When to replace the Brass Nipple 1/4″ MPT (PX32)
Replace it when a thread is damaged, cross-threaded, or has been chased so often the crests are gone, and when the wrench flats are rounded. Any nipple that has cracked or been visibly stretched by overtightening comes out and does not go back.
Brass Nipple MPT PX32 — fitment and installation notes
Apply tape or paste in the direction of the thread and keep it clear of the first thread so nothing is pushed into the line. Tighten to a firm seat, and if a leak persists, break the joint and reseal it properly rather than adding another quarter turn, because brass will crack a plastic or aluminium port before it gives up. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Brass Nipple 1/4″ MPT
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Brass Nipple 1/4″ MPT do on the Tornado Marathon SE 900?
Brass is the material of choice here because pipe threads seal by deforming slightly as they are drawn together, and brass does that consistently without seizing or corroding into place the way steel does in a wet chemical environment. That also means a brass nipple can be removed years later during a service instead of shearing off in the port.
How do I know if my Brass Nipple 1/4″ MPT needs replacing?
Replace it when a thread is damaged, cross-threaded, or has been chased so often the crests are gone, and when the wrench flats are rounded. Any nipple that has cracked or been visibly stretched by overtightening comes out and does not go back.
What models is the Brass Nipple 1/4″ MPT (part# PX32) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Brass Nipple 1/4″ MPT (part# PX32) or get help?
You can add the Brass Nipple 1/4″ MPT (part# PX32) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
