Deuter Shoulder Harness X1152
$162.99
Genuine Tacony OEM Deuter shoulder harness (part# X1152) — item #33 on the Pac-Vac Aircomfort Main Assembly diagram. In stock, ships from Crystal, MN. Call 763-535-0770.
The Deuter shoulder harness (part# X1152) is the genuine Tacony OEM harness assembly made for Tacony by Deuter, the German pack manufacturer. It is the single component that decides whether a loaded backpack vacuum is comfortable for eight hours or punishing after two, and it is the reason the Aircomfort line carries that name.
Compatible Models for the Deuter shoulder harness
This part is a genuine Tacony OEM component confirmed against the manufacturer’s parts data for the following machines:
- Tornado: Pac-Vac 6 Aircomfort — Model 93012, Pac-Vac 10 Aircomfort — Model 93014, Pac-Vac 6 Roam Battery Backpack — Model 93016B-1
- CleanMax: CMBP-6CL backpack vacuum
Not sure if this fits your machine? Call us at 763-535-0770 with your model number and we will confirm it for you.
Why the harness is the most important part on the machine
Everything else on a backpack vacuum affects how well it cleans. The harness affects whether the operator can keep using it. A Deuter harness suspends the canister on a frame so it is held off the back, letting air move between the machine and the wearer, and it distributes weight onto the hips rather than hanging it from the shoulders.
That distinction matters commercially, not just ergonomically. Operator fatigue is what ends shifts early and what turns into injury claims. A worn harness quietly transfers load back onto the shoulders and spine, and the first sign is usually a complaint about the machine rather than about the straps.
When the Deuter shoulder harness needs replacing
Replace it when padding has compressed flat and no longer springs back, when webbing is frayed, cut or has lost its weave, when a buckle or adjuster no longer holds its setting under load, or when a stitched seam has opened anywhere along a load path.
Treat any load-bearing failure as immediate. A harness that lets go drops a full canister off someone’s back, and the damage to the machine is usually the cheaper half of that.
Check the harness frame and its fasteners at the same time. Frames and harnesses wear together, and a harness that failed early was often working against a loose or missing fastener that concentrated load in one place.
Twin City Vacuum has been selling and servicing Tacony equipment since 1956, and every part we ship is a genuine OEM component. Browse more in CleanMax CMBP-6CL Upper Body, or read more about the manufacturer at Tacony Corporation.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
Who makes the Deuter shoulder harness (part# X1152)?
Deuter, the German pack manufacturer, builds this harness for Tacony. It is a genuine OEM assembly, not a generic replacement strap set.
How do I know if my Deuter shoulder harness (part# X1152) needs replacing?
Padding that has compressed flat and no longer recovers, frayed or cut webbing, a buckle or adjuster that slips under load, or any opened seam on a load-bearing path. Any of those should take the machine out of service until it is replaced.
Does the harness include the frame?
No. X1152 is the harness assembly itself. The frame it mounts to is a separate part – call us on 763-535-0770 and we will confirm which frame your machine takes.
How do I order the Deuter shoulder harness (part# X1152) or get help?
You can add the Deuter shoulder harness (part# X1152) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tacony equipment since 1956 and can help confirm the right part for your machine.
