Bracket X9086
$11.99
Genuine Tacony OEM Bracket (part# X9086) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. A mounting bracket that locates and supports its component so it stays aligned under the machine vibration and load.
The Bracket (part# X9086) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the formed mounting bracket that locates a component against the tank assembly.
What the Bracket does
This bracket carries and positions a component on the tank assembly, holding it at the correct angle and taking the vibration load off the part itself and off the plastic it mounts to. Brackets on a self-contained extractor spend their life absorbing the buzz of a vacuum motor and pump running together.
When to replace the Bracket (X9086)
Replace it when it is bent, cracked at a bend radius or a mounting hole, or when the holes have elongated so the component can shift. Elongated holes are the usual failure and they let the mounted part move, which then chafes hoses or misaligns a drive.
Bracket X9086 — fitment and installation notes
Check the mating surface is flat before fitting. If the old bracket cracked at a bend, look for what was loading it — a bracket rarely fails on its own, and refitting a new one into the same misalignment will crack it too. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Bracket
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Bracket do on the Tornado Marathon SE 900?
This bracket carries and positions a component on the tank assembly, holding it at the correct angle and taking the vibration load off the part itself and off the plastic it mounts to. Brackets on a self-contained extractor spend their life absorbing the buzz of a vacuum motor and pump running together.
How do I know if my Bracket needs replacing?
Replace it when it is bent, cracked at a bend radius or a mounting hole, or when the holes have elongated so the component can shift. Elongated holes are the usual failure and they let the mounted part move, which then chafes hoses or misaligns a drive.
What models is the Bracket (part# X9086) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Bracket (part# X9086) or get help?
You can add the Bracket (part# X9086) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
