24V Battery Charger 64602038

$1,478.99

Genuine OEM 24-volt on-board battery charger (part# 64602038) for the Tornado BDSO 27/28. It recharges the machine’s battery pack on a profile matched to the batteries.

Genuine OEM 24-volt battery charger (part# 64602038) for the Tornado BDSO 27/28 stand-on scrubber. It recharges the machine’s 24 V pack, following a charge profile designed for the battery type the machine is built around.

The profile is the part that matters most and the part that is easiest to get wrong with a substitute. A charger does not simply push current until the voltage rises; it works through stages, and the voltages and the finishing behaviour differ between flooded lead-acid, AGM and lithium packs. A charger set for the wrong chemistry either leaves the pack chronically undercharged — which sulphates a lead-acid battery and steadily shortens the runtime an operator gets — or overcharges it, which cooks off electrolyte, heats the pack and shortens its life even faster. On a machine where the battery pack is one of the most expensive components, the charger is the thing protecting it.

The usual complaint is a machine that will not run a full shift. That is a battery symptom, but the charger is a prime suspect: a charger that is not completing its cycle, that is cutting out early, or whose output has drifted will starve a healthy pack. Before condemning either, check the charging lead and plug, the battery terminals and the pack’s own condition — a single failing cell drags the pack down and looks exactly like a charger fault.

Chargers are also damaged by what they live through: dropped leads, water ingress, and being run with poor ventilation so they run hot.

Compatible Models

This part is shared across 7 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the battery charger drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the battery charger (part# 64602038) do?

It recharges the machine’s 24 V battery pack, following a staged charge profile designed for the battery type the machine is built around.

Can I use any 24 V charger?

Not safely. Charge voltages and finishing behaviour differ between flooded lead-acid, AGM and lithium packs. The wrong profile either chronically undercharges the pack — sulphating it and cutting runtime — or overcharges it, which cooks off electrolyte and shortens pack life faster still.

My machine will not last a full shift. Is the charger at fault?

It is a prime suspect: a charger that is not completing its cycle, cutting out early, or whose output has drifted will starve a healthy pack. Check the charging lead and plug, the battery terminals and the pack itself first — a single failing cell drags the pack down and looks exactly like a charger fault.

How do I order the 24V Battery Charger (part# 64602038) or get help?

You can add the 24V Battery Charger (part# 64602038) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the 24v battery charger (part# 64602038) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “24V Battery Charger 64602038”

Your email address will not be published. Required fields are marked *